Email updates

Keep up to date with the latest news and content from Investigative Genetics and BioMed Central.

Open Access Letter to the Editor

Comment on Kokshoorn, B, and Blankers, BJ ‘Response to Grisedale, KS and van Daal, A: comparison of STR profiling from low template DNA extracts with and without the consensus profiling method’

Kelly Grisedale* and Angela van Daal

Author Affiliations

Faculty of Health Sciences and Medicine, Bond University, Gold Coast, QLD 4229, Australia

For all author emails, please log on.

Investigative Genetics 2013, 4:2  doi:10.1186/2041-2223-4-2

The electronic version of this article is the complete one and can be found online at: http://www.investigativegenetics.com/content/4/1/2


Received:4 December 2012
Accepted:4 December 2012
Published:3 January 2013

© 2013 Grisedale and Daal; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Kokshoorn and Blankers responded to our recent article by saying that replicate analysis and consensus profiling of low template samples was best in terms of reliability and objectivity. We agree that the consensus approach has benefits, particularly in eliminating non-repeating spurious alleles from the final profile. However, with the development of statistical models that can accommodate stochastic effects and allele drop in, it may be beneficial to perform a single amplification with three times the amount of template, since much information is lost from the profile using the consensus approach.

Please see related article:http://www.investigativegenetics.com/content/4/1/1 webcite

Keywords:
Low template DNA; Stochastic effects; Consensus profiling

Background

In response to our recent article ‘Comparison of STR profiling from low template DNA extracts with and without the consensus profiling method’ [1], Kokshoorn and Blankers concluded that ‘one should distinguish between the quantity and the quality of information’, with quality being preferred when deciding on an analysis and interpretation strategy for low template DNA (LTDNA) profiles. This was in fact the conclusion of our paper. We agree that the consensus profiling works to reduce allele drop in (ADI) from the interpretation of the final consensus profile. However, other measures of quality, such as peak heights, peak height ratios and allele and locus drop out (ADO and LDO) were all improved when a single amplification with three times the amount of template was performed. We agree that consensus profiling has benefits, but it is important to note just how much information is lost from the profile when the consensus method is applied.

Kokshoorn and Blankers are correct in their response that our paper did not discuss the use of a stochastic threshold. Use of a stochastic threshold provides a means to confidently call alleles in mixture profiles. We believe that stochastic thresholds have value. However, with the increased sensitivity of LTDNA analyses, one must accept that most, if not all, results experience substantial stochastic effects and fall below a stochastic threshold. Our work, instead, was an exercise to simply observe how many alleles were obtained or lost when a consensus approach was implemented for single source samples. For that purpose we used the 50 RFU detection threshold implemented by others [2].

In casework, a stochastic threshold is an important component of LTDNA profile interpretation and the Netherland Forensic Institute’s use of a validated relative fluorescence units (RFU) threshold is to be lauded. However, Kokshoorn and Blankers’ statement that ‘a single analysis of all available template material in LTDNA samples, as proposed by Grisedale and Van Daal, will generally not yield a DNA profile of sufficient quality (that is, with all alleles of all donors above the stochastic threshold)’ and therefore any results from a single amplification are less objective than a consensus profile, seems odd, since there is no guarantee that a consensus profile will achieve this measure of validity either. Indeed, splitting a sample reduces the chance that any alleles in each of the aliquots can meet the stochastic threshold. Thus, under the Kokshoorn and Blankers approach most LTDNA samples would yield little information. In addition, if only alleles above the threshold are called in a consensus profile, then this approach can equally be applied to a profile from a single amplification.

Kokshoorn and Blankers are stating well accepted principles in their comments that mixture profiles involve more complex interpretations. This is true whether or not a consensus approach is applied. Alleles from a minor contributor should always be interpreted with care because of the potential for stochastic effects and the possibility of allele-sharing with a major contributor. Their points further support our position; allele-sharing and stochastic effects increase with decreasing amounts of total template DNA per amplification. However, statistical tools are being developed that may accommodate these issues and have been implemented in some laboratories.

In 2008, Gill et al.[3] stated, ‘There is currently no statistical model that incorporates all these parameters simultaneously. In this respect, all existing models must be considered incomplete (indeed we must consider that a complete model is unattainable)’. However, the statement following the aforementioned quote was, ‘However, the theory is well established, and the parameters of probability of dropout and probability of contamination can be universally applied to all DNA profiles using the framework originally described by Gill et al.[4], and programmed into an expert system [5,6]’. In the four years since this paper by Gill et al.[3] was published, further statistics software programs for the interpretation of mixture profiles have been developed which may accommodate ADO and ADI [7-10]. The consensus profiling method was initially developed to overcome the stochastic effects, particularly ADI [4]. If the statistical programs can incorporate these stochastic issues into the model, the evidence would be maximized by applying these tools to the DNA profile that contains the most information with the proper uncertainty/confidence associated.

Overall, our conclusions remain the same: the consensus approach will certainly be beneficial for dealing with ADI. However, when the template amount is limited, the most informative profile will likely be gained by a single amplification which can be analyzed using statistical interpretations that accommodate the stochastic effects and contamination.

Abbreviations

ADI: Allele drop in; ADO: Allele drop out; LDO: Locus drop out; LTDNA: Low template DNA; RFU: Relative fluorescence unit. STR, Short tandem repeats.

Competing interests

The authors declare that they have no competing interests.

References

  1. Grisedale KS, van Daal A: Comparison of STR profiling from low template DNA extracts with and without the consensus profiling method.

    Investigative Genet 2012, 3:14. BioMed Central Full Text OpenURL

  2. Tucker VC, Hopwood AJ, Sprecher CJ, McLaren RS, Rabbach DR, Ensenberger MG, Thompson JM, Storts DR: Developmental validation of the PowerPlex® ESI 16 and PowerPlex® ESI 17 systems: STR multiplexes for the new European standard.

    Forensic Sci Int Genet 2011, 5:436-448. PubMed Abstract | Publisher Full Text OpenURL

  3. Gill P, Curran J, Neumann C, Kirkham A, Clayton T, Whitaker J, Lambert J: Interpretation of complex DNA profiles using empirical models and a method to measure their robustness.

    Forensic Sci Int Genet 2008, 2:91-103. PubMed Abstract | Publisher Full Text OpenURL

  4. Gill P, Whitaker J, Flaxman C, Brown N, Buckleton J: An investigation of the rigor of interpretation rules for STRs derived from less than 100 pg of DNA.

    Forensic Sci Int 2000, 112:17-40. PubMed Abstract | Publisher Full Text OpenURL

  5. Gill P, Kirkham A, Curran J: LoComatioN: a software tool for the analysis of low copy number DNA profiles.

    Forensic Sci Int 2006, 166:128-138. PubMed Abstract | Publisher Full Text OpenURL

  6. Curran J, Gill P, Bill MR: Interpretation of repeat measurement DNA evidence allowing for multiple contributors and population substructure.

    Forensic Sci Int 2005, 148:47-53. PubMed Abstract | Publisher Full Text OpenURL

  7. Mitchell AA, Tamariz J, O’Connell K, Ducasse N, Budimlija Z, Prinz M, Caragine T: Validation of a DNA mixture statistics tool incorporating allelic drop-out and drop-in.

    Forensic Sci Int Genet 2012, 6:749-761. PubMed Abstract | Publisher Full Text OpenURL

  8. Haned H: Forensim: An open-source initiative for the evaluation of statistical methods in forensic genetics.

    Forensic Sci Int Genet 2011, 5:265-268. PubMed Abstract | Publisher Full Text OpenURL

  9. Perlin MW, Legler MM, Spencer CE, Smith JL, Allan WP, Belrose JL, Duceman BW: Validating TrueAllele® DNA Mixture Interpretation.

    J Forensic Sci 2011, 56:1430-1447. PubMed Abstract | Publisher Full Text OpenURL

  10. Balding DJ, Buckleton J: Interpreting low template DNA profiles.

    Forensic Sci Int Genet 2009, 4:1-10. PubMed Abstract | Publisher Full Text OpenURL