Email updates

Keep up to date with the latest news and content from Investigative Genetics and BioMed Central.

Open Access Highly Accessed Review

Forensic trace DNA: a review

Roland AH van Oorschot1*, Kaye N Ballantyne2 and R John Mitchell3

Author Affiliations

1 Forensic Services Department, Victoria Police, 31 Forensic Drive, Macleod 3085, Victoria, Australia

2 Department of Forensic Molecular Biology, Erasmus University Medical Center, 3000 CA Rotterdam, The Netherlands

3 Department of Genetics, La Trobe University, Melbourne, Victoria 3086, Australia

For all author emails, please log on.

Investigative Genetics 2010, 1:14  doi:10.1186/2041-2223-1-14

The electronic version of this article is the complete one and can be found online at: http://www.investigativegenetics.com/content/1/1/14


Received:20 July 2010
Accepted:1 December 2010
Published:1 December 2010

© 2010 van Oorschot et al; licensee BioMed Central Ltd.

This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

DNA analysis is frequently used to acquire information from biological material to aid enquiries associated with criminal offences, disaster victim identification and missing persons investigations. As the relevance and value of DNA profiling to forensic investigations has increased, so too has the desire to generate this information from smaller amounts of DNA. Trace DNA samples may be defined as any sample which falls below recommended thresholds at any stage of the analysis, from sample detection through to profile interpretation, and can not be defined by a precise picogram amount. Here we review aspects associated with the collection, DNA extraction, amplification, profiling and interpretation of trace DNA samples. Contamination and transfer issues are also briefly discussed within the context of trace DNA analysis. Whilst several methodological changes have facilitated profiling from trace samples in recent years it is also clear that many opportunities exist for further improvements.

Aims and scope

Trace DNA analysis has become an integral part of a forensic laboratory's workload and a key tool for investigators. Accordingly, there has been considerable research conducted in order to investigate the characteristics of trace DNA and the best methods to improve its collection, amplification and interpretation. This review aims to provide a brief history of trace DNA and to summarize some of the methods and techniques used to collect, amplify and interpret the smallest samples encountered in forensic biology. Although it is not possible to provide an exhaustive description of all minutiae, or all of the numerous cases where trace DNA has provided key evidence, we hope that the reader will gain an appreciation of the complex nature of trace DNA, the current state of knowledge and the areas where research remains to be done.

Brief history

Brief history of polymerase chain reaction (PCR)-based DNA profiling in forensic casework

In the early 1990 s, forensic science started moving away from markers such as D1S80, consisting of large core repeat units and overall large amplicon size [1-4] to short tandem repeats (STRs) [5-12]. The first widely used commercial kits designed for the typing of multiple STRs in a single reaction became available in the late 1990s/early 2000s [13-18]. PCR allowed the generation of genetic information from minute amounts of DNA; multiplexing of primers allowed the generation of genetic data from multiple sites from the same aliquot of DNA thus reducing sample consumption; fluorescent primers assisted multiplexing and new automated typing systems; and the use of STRs improved the chances of profiling poor quality samples. As the desire for higher discrimination power between individuals arose, the number of loci targeted by a single multiplex increased and there are now a number of commercially available, well-validated kits, incorporating 15 - 16 highly variable STR loci (plus amelogenin), such as PowerPlex® ESX and ESI systems [19-21] and AmpFlSTR® NGM [22]. These new kits also include improvements in primer design, buffer composition and amplification conditions which improve the analysis of trace samples [19-22].

The desire to compare DNA profiles between cases over time and across jurisdictions (and the associated legislations in many countries around the world supporting the establishment of National DNA databases) dictated that the forensic community select a core set of loci for the generation of DNA profiles. The international forensic community identified a small set of core loci mainly consisting of tetranucleotide tandem repeat loci [23,24]. Although the loci used by each jurisdiction are not always the same, there is a considerable amount of overlap in the loci used among the jurisdictions.

Although the establishment of a consensus set of core STR loci allows comparisons of profiles across jurisdictions and over time through use of national databases, it may also be simultaneously stifling opportunities for the improvement in the quality and efficiency of the service provided. Changing the type of markers used, from STRs to single nucleotide polymorphisms (SNPs), may result in increased success from more forensic samples and be more adaptable to high-throughput and/or miniaturized typing systems. Theoretically, the smaller amplicon sizes of SNPs lend themselves well to the production of genetic profiles from both degraded and trace DNA. Their reduced level of polymorphism relative to the routinely used STRs is, however, a disadvantage. With sufficient numbers this can be overcome, although it may make mixture resolution more difficult. Whilst sensitive SNP-based individualization profiling systems are available [25,26] they are not routinely used.

A major improvement that the forensic community has developed to assist in the typing of degraded and trace DNA has been the recent re-engineering of primers of the core STR systems, such that they are positioned closer to the repeat units in order to reduce the length of the amplified flanking regions [27-36]. The use of mobility-shifters (non-nucleotide linkers, Applied Biosystems, CA, USA ) and novel multiplex design strategies [such as Promega's ESI and ESX kits (WI, USA)] have allowed all the core CODIS (Combined DNA Index Systems) and European set of loci to be amplified as 'miniSTR' loci, thus increasing the profiling success rate from difficult samples [19,35,37].

Brief history of biological sample types collected and typed for forensic investigations

PCR-based methodologies allowed for the generation of profiles from types of samples not previously examined - such as cigarette butts [38], single human hairs [39], urine [40], fingernail scrapings [41] and bite marks [42] - and also improved the success in generating useful profiles from old, burnt, degraded bone and tissue samples [34,43-50].

In 1997 it was reported that DNA profiles could be generated from touched objects [51]. This opened up possibilities and led to the collection of DNA from a wider range of exhibits (including: tools, clothing knives, vehicles, firearms, food, bedding, condoms, lip cosmetics, wallets, jewellery, glass, skin, paper, cables, windows, doors and stones) [52-69]. A concomitant increase in the application of DNA profiling in investigations of a wider range of offences, including theft, homicide, clandestine laboratories, armed robbery, assaults, sex offences and volume crime, accompanied the increase in types of exhibits. The ready availability of DNA from touched objects has also assisted in the success of many national offender DNA databases [70-76] as many focused on including profiles from perpetrators of volume crimes (such as burglary, vehicle crimes, street robbery and drug cases). The traditional forensically relevant biological substances, such as blood and semen, are not commonly encountered at these sorts of crime scenes but touched objects provide a wide scope for revealing the offender's DNA profile, and the frequency of recidivism in these crimes increases the probability of multiple hits across databases.

In the early years of trace DNA profiling there were several sceptics within the forensic community about the possibility of obtaining DNA profiles from touched objects. However, after conducting their own research they revised their views on trace DNA. In addition to the sceptics, there were forensic laboratory managers who disliked the potential difficulties trace DNA brought, as they foresaw a significant increase in sample submissions which they did not have the necessary resources to process. However, many later used the favourable prospect of trace DNA to argue for increased staff and budgets and improved laboratory facilities. The later application of methodologies designed to increase the likelihood of obtaining useful profiles, specifically from very minute samples such as the low copy number (LCN) methodology with extra cycles or low template DNA (LTDNA) methods, have further increased the opportunity to generate profiles from trace crime scene samples [77-81]. However, these applications can bring their own challenges [82], which have reignited the debate over the use of trace DNA in the forensic field [83-87].

What is currently commonly referred to as 'trace DNA' or 'touch DNA' has previously been referred to as low copy [77,88], or low template [82,89]. In our view, the application of a single term, such as trace DNA or LTDNA, can be a misleading simplification of a series of complex processes. Trace or touch DNA may be the appropriate term when referring to the collection of minute biological samples at the crime scene or the process of collecting and extracting the tiny amounts of material within the sample in the forensic laboratory. Low template is used as a descriptor for the amplification phase, where the use of low amounts of material is likely to generate stochastic effects. While the term LCN also relates to low template, it tends to be used to describe the process of increased cycle number rather than the amount present. The profile could equally be referred to as 'low level' in the interpretation phase, reflecting that the peak heights are below a validated threshold level. For consistency, within this review we will use the term 'trace DNA' to refer to any sample which may fall below the recommended thresholds at any stage of the process - detection, collection, extraction, amplification and interpretation.

Trace DNA typically refers to either the very limited and/or invisible biological samples and/or amounts of DNA less than 100 pg [88]. However, some laboratories use a 200 pg limit as the threshold limit [82,90]. Recently, there has been some discussion about eliminating template thresholds entirely from the definition, as they represent an artificial cut-off for a phenomenon which is continuous. Instead, a risk assessment based on peak heights of the resultant DNA profile can be used to determine whether or not an appropriate amount of DNA was present and whether or not stochastic factors affected the genotype result [91]. It should be recognized that an apparent trace DNA sample at a particular processing phase does not necessarily mean that it, or the profiles generated from it, will continue to be considered a trace DNA sample in subsequent phases. It should also be understood that, as methods change, any defined threshold amount for trace DNA will also probably change. We encourage any biologists working with trace DNA amounts to consider all aspects of the process, rather than simply focussing on the interpretation phase. Working effectively with trace DNA necessitates an understanding of factors relating to its collection, extraction, amplification and interpretation, as well as issues relating to contamination and transfer.

Trace sample collection

Targeting

The first step in collecting trace samples is to identify which areas to target. By and large, trace samples on surfaces are not readily identifiable. Whilst finger printing agents are used to identify touched areas on some exhibits, many exhibits are swabbed or tape lifted based on assumptions about where the DNA-containing material is located. The use of non-invasive detection systems would be ideal. One such system is the application of light sources, such as the Polilight [92-97], but the use of these is not as widespread as it could be. This may be due to a lack of awareness of their usefulness, or their perceived impracticality, or their non-ideal performance for specific tasks or that further investigative and validation work is required to define their scope and limitations. Touched surfaces that have been revealed using fingerprinting methodologies are usually those surfaces on which fingerprints are sought as the priority, rather than surfaces where DNA will be sampled. Although many fingerprinting methods do not adversely affect the quality of retrieved DNA, some methodologies may do so [52,66,98-104] and others may reduce the quantity of retrieved DNA [66,69,105]. When considering the downstream use of the fingerprint, more emphasis should be given to the impact of the fingerprinting methodology used on subsequent DNA retrieval and quality.

Improvements in the methodologies for identifying the biological source of trace samples (not just fingerprints) on exhibit surfaces, and their application in the course of forensic investigations, should help to improve sample collection. Swabbing an assumed trace sample area that is smaller than the actual deposition area will mean that some of the sample goes uncollected. Swabbing an area greater than the actual area of deposit may mean that sample is spread over a wider area and that less is collected. Both approaches also have the potential to give an inaccurate view of where the actual sample was located. It is, therefore, not only necessary to be aware of the precise location of the material being targeted but also to collect from the area appropriately.

Collecting methodologies

Most trace samples are collected using swabs. Swabbing an area requires a moistened swab to traverse the whole target area multiple times with some pressure and rotation of the swab so that the full surface area of the swab can contribute to the collection. However, a moist cotton swab does not pick up all of the available biological material from the surface and, in many instances, it may pick up less than half the available sample [106,107]. Swabbing an area with multiple swabs, and the co-extraction of these swabs, has been advocated in order to enhance overall retrieval of DNA [65,105,108,109]. It is now common practice to perform a double swabbing technique. Some moisten the first swab but leave the second swab dry. Keeping the second swab dry, if the first one has already absorbed all the moisture it contributed to the sample, may not collect as much of the target as if it too was moistened prior to swabbing. In this case it is important to ensure that all its moisture is recaptured.

Although water is mainly used as the moistening agent [57,107], some laboratories use 0.01% sodium dodecyl sulphate [110] or isopropanol (MiniPopules, PuritanMedical, Maine, USA) [111]. Limited research has been dedicated towards identifying an optimal solution for the retrieval of DNA from touched objects. It is possible that an empirical study of agents, or a combination of agents, with both dissolving and abrasive properties will reveal improvements. Some surfaces are more difficult to collect samples from than others [57] and the use of different moistening agents for different surfaces may facilitate collection.

Various types of cotton swabs are used but other swab types such as foam are also in use [57,111,112]. The type used for trace DNA collection can be a matter of convenience (already used for the collection of other sample types) or price. Few practitioners have undertaken studies to check if the swab type used is better or worse than the alternatives for the purpose of collecting touch/trace samples. The identification of the optimal collection methods and swab types for particular samples on particular substrates would be beneficial. It is also important that the swabs be DNA-free (and not just sterile), in order to avoid the problems seen in the recent 'Phantom of Heilbronn' case discussed and referred to below.

Once the DNA-containing material has been collected, most methodologies require the DNA to be extracted from the collection device. In the case of a cotton swab, it has been shown that some commonly used DNA extraction methodologies are not particularly efficient in retrieving all the DNA collected from the swab [105]. It may be easier to retrieve DNA from some swab types than others and particular DNA extraction methods and protocols may, in turn, be better than others. A comprehensive comparison of extraction methodologies/protocols from various collection devices used specifically to collect and retrieve touch/trace samples, will assist investigators in developing and applying the most successful protocols.

If a swab used to collect biological material is allowed to dry prior to extraction less DNA is retrieved than if the still moist swab was processed immediately [105]. Freezing the collection swab rather than drying it prior to extraction results in DNA recovery rates approaching that of a moist swab [113]. In some laboratories it is now common practice to freeze collection swabs immediately after collection.

Early on, it became apparent that swabs of trace samples found on clothing did not provide high-quality results as could be expected. The swabs frequently contained inhibitory factors and/or provided profiles that were difficult to interpret. Tape is now used regularly to retrieve DNA containing material from worn clothing [57,112,114]. By pressing a strip of tape multiple times over the target area, the most recently deposited material, with fewer inhibitory factors, are collected and accumulatively they provide better profiles [115,116]. Some laboratories are using tape or sticky tabs not only to collect biological material from clothing, but also from other touched surfaces. However, taping of larger surfaces can be tedious and the multiple strips of tape that are required can pose downstream processing difficulties. Franco and Goetz [115], Jiang [117] and Berschick [118] have all demonstrated that the use of filtered tips and vacuums could be useful alternatives for collecting biological material, particularly from large surface areas.

The above collection methods do not distinguish between the contributing sources of DNA-containing material. The desired target DNA is often a trace component of a large amount of DNA-containing material that emanates from multiple sources. The use of laser microdissection techniques allows sufficient numbers of relevant target cells to be isolated from the other overwhelming cell types. Microscopically, different cell types can be distinguished based on morphological characteristics, various chemical staining or fluorescence labelling techniques. Using this technology a clear DNA profile derived from the minor cell type alone can be generated that otherwise would have either been swamped by the major component and not been detectable in the profile, or have been part of a complex and more difficult profile to interpret [119-128]. Anslinger et al. [125] and Vandewoestyne et al. [128] have demonstrated that, even when the cell type of two contributors in a mixture is the same, the cells derived from a male contributor and a female contributor can be distinguished from each other using fluorescent probes and separated accordingly using the laser microdissection methodology. Although laser microdissection has been shown to be exceptionally useful for separating contributors, the preparation of the sample may act as a limitation to its widespread forensic use, as coated glass slides are required. A sample must be transferred from the collection device to the slide, which may result in the loss of cells. It would be preferable to use laser microdissection methodology directly on the initial collection device. Alternatively, the development and application of appropriately sticky flexible slides or tapes for direct collection could increase the application of laser microdissection. Furthermore, the identification of relevant cell types is currently often done manually and is time consuming. Further developments of automated cell type recognition software would be welcome.

Another approach to separating contributors in sample mixtures is the application of flow cytometry/cell sorting methodologies that are regularly used in some non-forensic applications [129,130]. Single cell sorting has been routine in many fields for years and allows the specific separation of heterogeneous mixtures of cell types [131]. Newer cell sorting technologies, such as the Becton-Dickinson NJ, USA) FACSAria III, allow the simultaneous separation of up to four distinct populations of cells, based either on the morphology of the cell or the use of specific antibodies against each cell type. Single or multiple cells can be sorted directly into PCR tubes or onto glass slides for low volume PCR applications. Although the cell sorting methods are faster and more easily automated than laser microdissection, the often degraded nature of forensic samples may create difficulties for this method which requires that the cells be largely intact and within a fluid matrix [132]. However, flow cytometry has previously been successfully applied to separate sperm cells from vaginal wash fluid following intercourse [132-134]. Provided technical difficulties can be overcome, flow cytometry and cell sorting may provide a successful method for the separation of complex mixtures of small numbers of cells.

Whilst swabbing and taping a touched area for retrieval of DNA seems simple and straightforward, training exercises with would-be collectors have demonstrated how easy it is to get wrong. Inadequate training, combined with the absence of competency testing and ongoing monitoring of an individual's techniques, could drastically limit the success rates. There is a clear need for improved initial and ongoing training, proficiency testing, success-rate data collection and bench marking [135,136].

Trace DNA extraction

For many years forensic practitioners have relied on Chelex 100 (Bio-Rad, CA, USA) [137] and organic methods [138] to extract DNA from their samples. Commercially available kits and methodologies, optimized for specific types of samples, became prominent during the 1990s [139,140]. The last few years have seen developments which utilize silica-coated magnetic beads to capture DNA from the rest of the lysed cell [such as Promega's DNA IQ (WI, USA) and Invitrogen's Chargeswitch (CA, USA)] and optimization of these to suit robotic systems [141,142].

Several DNA extraction methods utilized by forensic scientists do not recover all of the collected DNA, with losses of up to 75% occurring from Chelex and organic extraction methods [105,142,143]. Some of the loss is influenced by the substrate on which the sample is presented but the majority is due to the methodology. The bead extraction systems tend to have binding thresholds (well above trace amounts) over which the remaining DNA is discarded. The majority of samples submitted for profiling contain relatively large amounts of DNA well above the 0.1-0.5 ng minimum required by most common STR profiling systems. Below this amount standard methodologies tend to provide mainly partial profiles (see below). Accordingly, it is not relevant in many cases that there is some loss of DNA during the extraction process. Few studies have, however, focussed on optimizing extraction techniques specifically for trace DNA samples.

Most extraction methods result in DNA in a relatively large volume. There may be some jurisdictions that require the retention of a specific portion of the collected sample for repeat analysis. However, when this is not the case, and when dealing with a trace sample, the elution of the DNA in a relatively large volume could be limiting. Whilst there may be sufficient DNA in total to acquire a good profile, the concentration may be so low from trace samples that when only a proportion of the available volume is utilized in the amplification, less than optimal profiles are generated. Concentration and clean-up devices, such as Microcon (Millipore, MA, USA), MinElute (Qiagen, CA, USA) or NucleoSpin (Clontech, CA, USA) DNA clean-up columns, are used to help concentrate and/or clean-up samples prior to amplification [144,145]. However, some of the benefit of their use is negated by the loss of some DNA that these methods entail [105]. This loss could potentially be minimized by the addition of Poly A RNA or salmon sperm DNA to the concentration device [144].

As most extraction methods have a relatively low efficiency rate, it would be desirable to optimize methodologies specifically for trace samples so that one has the opportunity to: (a) extract most of, if not all, the available DNA; (b) remove all amplification inhibiting elements without the loss of DNA; (c) utilize all of the extracted DNA for amplification; and (d) add the amplification reagents to the vessel containing the DNA rather than having to transfer the DNA to a separate vessel containing the amplification reagents (thus avoiding a further loss that could be encountered in the transfer step - for example, retention of DNA on vessel walls and/or in pipette tips). The development of direct PCR from 1.2-2 mm FTA card punches containing saliva or blood, without the need for pre-washing or the removal of heme, is a step toward the latter [146,147]. However, at present, the direct PCR methods are not yet able to amplify swabs or tape-lifts which would be required with trace DNA.

Trace DNA quantitation

Although it may not always seem necessary to quantitate trace samples, given the expected low concentration of DNA, it can be helpful to have an indication of the approximate quantity present when interpreting the resultant STR profile. In addition, it is not always correct to assume that touched objects contain only low amounts of DNA. Depending on the nature, frequency and duration of the contact, tens or hundreds of nanograms may be present [51,65,66,148]. As such, quantification of every sample can ensure the maximum efficiency and prevent repeat analyses of over-amplified samples [82]. However, a negative quantitation result should not prevent the downstream processing of trace samples. Partial or even complete 9 locus STR profiles have been obtained from samples giving a negative result with the most commonly used forensic quantification kit, the Quantifiler Human DNA Quantification kit (Applied Biosystems, Foster City, CA, USA) [149]. Most probably, stochastic sampling and amplification effects are operating on the real-time quantitation method with extremely low template amounts and, as such, any quantitation result of very low amounts of template must be taken as an indication of the concentration, rather than as an absolute measurement as with higher input amounts.

It is a common practice in some laboratories to use only a portion of the extracted DNA for amplification due to; (a) internal methods, procedures and policies; (b) a lack of willingness to concentrate the sample for laboratory efficiency reasons; and/or (c) a desire to retain a certain portion of the sample for possible future further typing. A deeper consideration of workflow processes and priorities may yield an alternative protocol that will allow the use of a greater portion of the available DNA for amplification thus increasing the chance of generating fuller and easier to interpret profiles.

Trace DNA amplification and detection

General

In recent years, the most intensive research and discussion in the field of trace DNA has been in the areas of amplification and interpretation of low level template amounts. Perhaps this focus reflects the perceived ease of optimising this aspect, in comparison to the others discussed above, or that amplification is the main area where the forensic molecular biologists have control of the quality of the sample and analysis; the other areas being more the domain of the criminologist/crime scene officers, or indeed simple chance. Nonetheless, continued research has led to some significant improvements in the way forensic molecular biologists amplify and interpret trace DNA profiles but it has also raised many more questions and resulted in research areas opening up, particularly in the statistical interpretation of profiles.

Improving amplification

The most commonly used method of enhancing the success of trace DNA amplification is to increase the number of cycles. This procedure, developed at the Forensic Science Service (FSS) in the UK (and adopted by other laboratories), is often referred to as an LCN analysis [77]. Over 21,000 samples have been analysed with this technique (in the UK alone) at the time of writing, representing a significant portion of the overall caseload [150]. For this LCN technique the number of cycles used during the PCR of the STR loci is increased to 34, potentially allowing an increase in product of over 3 billion, compared to the standard 28 cycle reaction. Increased cycle number is commonly used in research and ancient DNA settings, where up to 60 cycles may be used to maximize the success of the amplification [151].

Many papers have described the efficacy of increasing cycle numbers [77,78,152]. In the original description of LCN, complete profiles from only 5-10 cells (30-60 pg) and substantial increases in peak heights were reported [77]. Kloosterman and Kersbergen [152] used a slightly different strategy in which additional Taq polymerase was added after 28 cycles, and thermal cycling continued for a further six cycles. Single cells were reportedly analysed successfully, with as much as 6 months difference between the first 28 and second six cycles. Although most of the older STR profiling kits recommend only 28 cycles, new kits are taking advantage of the improved success resulting from the increased number of cycles, such as the Applied Biosystems (CA, USA) Minifiler (29 cycles), Yfiler (30), and NGM (29) and also Promega's ESX and ESI kits (30 cycles). This development will allow those laboratories that are reluctant or unable to perform the LCN methodology to benefit from the advantages of an increased cycle number. However, it also brings with it a need to increase the stringency of contamination prevention, as it is likely that more sporadic contamination will be detected due to the increased sensitivity.

Primer design for the amplification of the STR loci in the commercial multiplexes can be, and has been, improved. While the majority of kits still use the original primers, Butler et al. [28] redesigned the amplicons to produce 'mini-STRs', producing primers which had significantly higher success rates with degraded DNA due to the smaller amplicons. This concept of generating smaller amplicons was used to produce the MiniFiler STR kit (Applied Biosystems), which has a considerably higher success rate with degraded or inhibited DNA than the standard AB kits, but also has a lower template input requirement - 0.125 ng compared to 0.5 ng [35]. This decreased threshold may reflect the increased priming and amplification efficiency of the new primers, but also that the optimization of the multiplex can play a large part in the sensitivity of the amplification.

However, there is still more that could be done to improve the amplification success of forensically relevant STR loci. Previous research has shown that the incorporation of synthetic nucleotides with stronger binding capabilities than standard nucleotides into PCR primers can substantially improve the amplification success of low template levels. Locked nucleic acids, an RNA analogue, have a binding strength far superior to DNA, giving increased sensitivity and specificity [153,154]. Ballantyne et al. [155,156] have shown that incorporating a small number of locked nucleic acid (LNA) bases into the mini-STR primers can increase amplification success of trace DNA samples by over 300%, suggesting that the incorporation of LNA into primers should be examined as a tool to increase amplification of forensically relevant samples in new commercial multiplexes.

In addition to altering the cycling conditions or primer sequences, the master-mix components, and the molecular mechanisms by which they can interact, can be altered. Reducing the volume of the PCR can have the most substantial effect. Gaines et al. [157] reported four-fold increases in sensitivity when the volume of reaction was reduced to 5 μL, while using 1 μL on glass slides allowed the amplification of 15 STRs from only 32 pg of DNA [158]. However, simply reducing the volume of an amplification may not increase efficiency or accuracy, it may simply increase the relative concentration of the template relative to the reagents. Although this will not remove all stochastic effects of low template amounts, it can reduce their impact on the resultant STR profile.

Altering specific components (such as magnesium chloride, primer or buffer concentrations) within the commercial STR multiplexes is not possible, due to the way they are prepared. There have been some suggestions that altered buffer formulations or primer concentrations may improve the amplification success of low level samples [146,147], although these remain untested with the current STR multiplexes. The newer commercial multiplexes such as MiniFiler and NGM do, however, have optimized buffer systems to cater for inhibited samples, which may be a factor in their increased sensitivity. However, altering the type of DNA polymerase has been shown to substantially increase reaction sensitivity and efficiency, giving improved results with low template amount or inhibited casework samples [159]. In the same way that alternative DNA polymerases have been examined, it would be desirable to see empirical studies of the effects of alternative concentrations of other components such as magnesium chloride, dNTPs and primers at trace DNA levels.

Another alternative worth considering is the addition of chemical adjuvants to increase reaction efficiency or sensitivity. Bovine serum albumin (BSA) can prevent inhibitory substances reducing the activity of Taq polymerase by sequestering phenolic compounds which may otherwise scavenge the polymerase [160] and its presence may reveal sufficient amplifiable DNA in samples which otherwise appear to contain only trace amounts. Although BSA will not increase amplification sensitivity from high-quality, inhibitor free DNA samples, many forensic samples may contain low levels of inhibitory substances and, thus, most commercial assays contain a low percentage of BSA as a standard component.

Instead of increasing the amplification efficiency, the amount of template added to the PCR can be increased to facilitate increased STR profiling success. Whole genome amplification (WGA) can assist by replicating the entire DNA sample, rather than the specific target as with PCR, producing hundreds of nanograms from picogram input amounts. This increase in DNA gives the analyst the opportunity to add 10 or 100-fold more DNA to the genotyping PCR, substantially increasing the probability of obtaining a complete profile. Additionally, it allows multiple, high quantity PCRs to be performed and generates sufficient DNA for archiving purposes. The commercially available methods work optimally on 1-10 ng of DNA, although they have been successfully used on single or small numbers of cells in non-forensic areas [161-163], and generate sufficient DNA to analyse hundreds of genes. However, substantial amounts of amplification bias have been observed between homologous alleles and loci with low template amounts with WGA [164,165]. Despite this problem, promising results were seen in the use of WGA and specifically multiple displacement amplification (MDA), on forensically relevant trace DNA samples [165-167]. STR profiling success was increased significantly, although peak height biases increased genotyping difficulty. It was, however, possible to optimize the commercial MDA methods for specific application with trace DNA by using molecular crowding [167] and altered denaturation methods [168] to promote balanced amplification. Newer WGA methods are currently emerging to cater for the increased DNA requirements for next-generation sequencing and SNP genotyping, and methods are emerging that eliminate bias and non-template amplification, allowing genotyping of 550,000 SNPs from sub-nanogram amounts [169]. The continued research and development of WGA may lead to a method sufficiently reliable to allow widespread use on trace DNA samples.

Improving detection of amplified product

The level of detection and ease of typing can be increased by manipulating the PCR product post-amplification. The most common method is to purify the PCR amplicons of the STR loci, removing salts, ions and unused dNTPs and primers from the reaction using filtration (for example, Microcon filter columns), silica gel membranes (for example, Qiagen MinElute columns), or enzymatic hydrolysis (for example, ExoSAP-IT) [79,81,170]. Purification to remove negative ions such as Cl- prevents inter-molecular competition occurring during the electrokinetic injection, ensuring that the maximum amount of DNA is introduced [171]. Purification by MinElute columns gave fourfold increases in peak heights, with only small increases in the numbers and scale of artefacts [170].

During the purification process it is also possible to concentrate the PCR product, to allow even more of it to be injected. Reducing PCR product volumes from 50-25 μL to 10 μL, can produce a six to 14-fold increase in peak height [79,170]. If the entire PCR product is reduced to ~1 μL for analysis peak heights can be increased even further, although the level of artefacts significantly increased [170]. In addition, a more purified PCR product can be added to the denaturing formamide for injection - using 10 μL instead of 1.5 μL of the product gives a further increase of ~12-fold over just purification and concentration [170].

In addition to purifying and concentrating the PCR product, the amount of product injected into the capillary can be increased either by raising the time or voltage, or both, of the electrokinetic injection. Although this may not be advisable on a non-purified product (due to the higher concentration of competing ions), increasing the injection time and voltage to 15 s at 9 kV can give about nine additional alleles per STR profile for trace DNA samples and increases peak heights sixfold [172]. However, comparison with profiles generated with an increased cycle number (34 instead of 28) showed that the latter method generates the most complete profiles with the highest peak heights [172]. However, combining purification with a 30 s 4 kV injection strategy gave an increased amplification success with lower levels of stutter and peak imbalance than the standard 34-cycle methodology and can be viewed as a more flexible approach to increasing trace DNA profiling success [79]. However, there is no clear consensus on the best injection profile to use - some laboratories have validated injection strategies of 6 kV for 30 s [173], or 5 kV for 15 s [80] or different conditions dependent on the amount of DNA (1 kV for 22 s for 100 pg, 3 kV for 20 s for 25-50 pg, 6 kV for 30 s for <25 pg) [110]. From the range of views regarding the 'best' injection profile, it appears that the degree of enhancement increased injection can give is highly dependent on the STR kit and the individual capillary electrophoresis (CE) machine being used and each laboratory should, therefore, investigate its own best levels.

Newer polymers such as POP-6 and POP-7 (Applied Biosystems) have increased the sizing precision available with capillary electrophoresis, but unfortunately seem to have decreased the sensitivity of detection (KNB, data not shown). This has required further optimization of the injection parameters to achieve comparable levels of peak heights between the polymers, with a change in the recommended default injections from 3 kV for 10 s with POP-4 to 1.2 kV for 23 s with POP-7. However, the use of altered fluorophores can overcome the decreased sensitivity, as they display higher levels of fluorescence and lower quenching over time than the currently used fluorophores - FAM and ROX. Newer dyes, such as Molecular Probes' BODIPY or Alexa Fluor Series, have become commercially available, with the latter being the brightest and most photostable oligonucleotide conjugates available, with average fluorescence greatly exceeding that of even 6-FAM [174]. Energy transfer (ET) cassettes, which contain both donor and acceptor dyes separated by a sugar-phosphate spacer, give substantially higher sensitivities than single dye fluorophores [175,176]. The incorporation of these more sensitive dyes into the commercial STR amplification kits may decrease the amount of template/PCR product by lowering the limit of detection.

Difficulties with improving amplification and typing of trace DNA

Despite all the above options for improving the amplification and detection success of trace (or, indeed, any forensic sample), many forensic laboratories have been reluctant to validate and implement them into standard case-work procedures. It is only recently that internal validations of trace DNA profiling using commercial multiplexes (with and without extended cycles/LCN methodology) have been published in peer-reviewed literature [79,80,173]. However, none of the commercial kits are validated by their manufacturer for 34 cycles or very low template amounts. The lack of validation is partially due to the innate variability that exists with trace DNA samples and their analysis. Any trace DNA sample, by its very nature, is below the stochastic threshold and is, thus, subject to the inherent variation which comes with operating at such low levels. A major cause of the reluctance in the forensic community to use methods designed for successful trace DNA analysis may be the increased level of artefacts that result from the increased sensitivity. Concomitant with the ability to amplify minute quantities of material is the increased likelihood of contamination being detected and of artefacts of the amplification process being increased due to stochastic effects. Four features are common across many trace DNA amplifications:

1. allele drop-out due to preferential amplification of one allele at one or more heterozygous loci. This is a near-constant feature of extremely low template and increases as template levels decrease [77,78,177,178]. Despite improving technologies rapidly increasing sensitivity, any amplification of trace DNA amounts must be interpreted in light of the probable drop-out of alleles

2. decreased heterozygote allele balance within a locus and between loci. The same stochastic sampling and amplification effects that cause drop-out also cause extreme peak height imbalance within and between loci, which can create difficulties evaluating zygosity at particular loci

3. allele drop-in, due to amplification artefacts such as stutter. Artefact rates can substantially increase with trace DNA amounts [78], leading to difficulties in characterizing the number of donors to a STR profile and to the assigning of alleles within a mixture

4. allele drop-in, caused by sporadic contamination occurring from either the crime-scene or the laboratory. Although the probability of allele drop-in remains the same, regardless of the template amount, the probability of detection increases with lowered genuine template levels [77,80,173]. Additionally, depending on when the contaminating source entered a sample, reanalysis may or may not reproduce the initial result.

As there are currently no methods to completely eliminate artefact product during the amplification of trace DNA, strategies are being developed to account for them statistically. However, this requires an in-depth understanding of the factors that may cause each type of artefact and accurate data regarding the frequency and scale of their occurrence, both of which are still being researched. An excellent example of the type of research required is that of Benschop et al. [179], which represents one of the first large-scale efforts to characterize artefacts generated by different trace DNA amplifications and typing strategies and an investigation of the most effective method to generate a useful consensus profile. The few validation studies that have been published to date [79,80,173] represent valuable resources for estimating the occurrence of the trace DNA artefacts, but it is unfortunate that few of the LCN validation studies specifically compare low template ( < 100 pg) amplifications with the standard 28 cycle to the extended 34 cycle (with, or without, product purification), with several notable exceptions [79,179]. The difference in methodologies across the various LCN and low template amplification and analytical procedures makes it difficult to compare their relative effectiveness or to build large inter-laboratory databases detailing the frequency of artefact production at low template levels.

Low level DNA interpretation

The interpretation of trace DNA analyses is currently the most controversial aspect of its use within the medico-legal systems. In placing a profile obtained from trace amounts of biological material found at the crime-scene into context, the analyst should take into account the potential for transfer of the material, the possible cellular origin of the DNA profile in question, the stochastic nature of the collection and analytical procedures and the possibility of artefacts confounding the true result. In most laboratories the analytical methods and statistical calculations employed for standard DNA typing are used for trace DNA - a process which is statistically and scientifically incorrect and which can bias calculations heavily against the defendant. In 2007, a high-profile case in Northern Ireland [180] raised questions regarding the appropriate interpretation methods of low template DNA and the subsequent UK Forensic Regulator's report recommended the development and validation of methods specific to trace DNA amounts [181].

Interpretation methods specific for trace DNA

Guidelines and models for the interpretation of trace level DNA profiles have existed for over a decade [77] but there has been no widespread implementation across laboratories performing low template analysis. Instead, the same profile interpretation and statistical methods are used as for high quantity samples. However, it is imperative that any analysis of a trace profile considers the four most common features of trace amplification: allele drop-out, decreased heterozygote balance, allele drop-in (stutter) and contamination, as described above. The effects of these can be minimized by the implementation of strict interpretation guidelines and specialized statistical models and can give the user reliable and robust results from trace DNA.

The most common method of ensuring the reliability of trace DNA profiles involves the use of detection thresholds. In order to eliminate background noise, a ~50 RFU threshold is commonly used as a calling threshold, termed the limit of detection (LOD). To ensure allelic drop-out does not result in false homozygote calls, a separate threshold, referred to as the low-template DNA threshold, T [182], the MIT (match interpretation threshold) [183], or the limit of quantitation (LOQ) [184] is set at 150-200 RFU. Only peaks above this threshold may be called as homozygous. The purpose behind this decision is to ensure that the probability of allele drop-out (Pr(D)) is minimized and so the probability of defining either a mixture as a single-source, or a heterozygote as a homozygote, is low. However, even with a strict threshold, drop-out may still occur. Therefore, it has been recommended that, instead of thresholds, a more continuous measure should be used which is modelled on the risk of dropout based on peak heights. In this manner, the evidence intensity can be included in the exclusion calculation and informative alleles below an arbitrary threshold value do not have to be automatically ignored [91].

The use of replicate reactions and the generation of consensus profiles (termed the 'biological model') have been advocated by many as the best way to ensure that reporting incorrect genotypes is minimised [77,78,179,185]. When the Random Man Not Excluded (RMNE) interpretation method is employed the consensus profile is considered necessary in order to account for the inherent stochastic variation in low template amplifications [77,78]. However, when allele drop-out is possible the use of the 2p rule may be non-conservative [186], and wastes information regarding peak height and dropout in the calculation [187]. In addition, there is no consensus on either the minimum number of replicates needed or how frequently one needs to observe an allele within the number of replicates conducted for it to be considered a true allele [90]. However, recent work has provided considerable empirical evidence suggesting that four replicates, with reported alleles detected at least twice, is the most accurate [179]. In particular, the practice of omitting loci which may have dropped out from the RMNE or probability of exclusion (PE) calculation method can be biased against the suspect, particularly as the probability that drop-out has occurred increases [89,188]. The International Society for Forensic Genetics (ISFG) has therefore recommended that RMNE is only used to interpret profiles where there is no probability of drop-out or increased stutter, which effectively rules out its use for trace DNA interpretation [188,189]. Some authors are advocating a move to a Bayesian based, likelihood ratio (LR) framework, where information regarding the probability of artefacts obscuring the true profile can be incorporated into the strength of evidence calculation [77,89,91,187,190]. The statistical model, as proposed by Gill et al. [77], and then expanded over the last decade [89,91,191], provides the necessary probabilistic methods, where the probability of observing the evidence profile can be combined with prior knowledge regarding dropout, the number of potential contributors, the possibility of contamination and many other factors. In addition, it is possible to use individual replicates within the likelihood ratio (LR) framework, rather than losing important information by generating consensus profiles. A customized expert interpretation system, LoComatioN, allows the automated evaluation of multiple genotypes and incorporates all necessary stochastic effects into the probability calculation [192]. Tvedebrink et al. [193] have begun the process of generating the empirical data and statistical models necessary to provide estimates of drop-out and it is likely that, in the coming years, firmer estimates will become available.

Trace DNA mixture interpretation

Mixed trace DNA profiles add yet another level of complexity to the interpretative process. Mixed samples may be composed of one or more major contributors with high quantities of DNA and with a minor contributor present only at trace levels. Alternatively, all contributors' DNA within the mixture may be at trace levels. Furthermore, DNA truly derived from a single source could be treated as a mixture due to high stutter peaks being present and, therefore, wrongly interpreted as coming from multiple individuals. Given the high probability of drop-in, drop-out and increased stutter, estimating the number of contributors can be problematic, as can separating the contributors' genotypes at any given locus. Amplification bias may cause the minor contributor's alleles to drop out entirely at some loci or may cause over-amplification of some alleles, creating the appearance of a separate contributor. In particular, the increased stutter seen with trace DNA amplification [77,78,179] creates formidable problems for mixture interpretation. Although there are locus-specific stutter percentage guidelines for standard template amounts, none exist for trace DNA amounts. In addition, there is evidence that both forward and backward stutter increases with increasing allele length within a locus [20,194-196]. A difference in stutter percentage of 12% has been reported between alleles 10 and 17 at a commonly used locus [20]. From the limited data available, peak heights of backwards stutter may increase from 0%-4% at the smallest allele within a locus, to 12%-20% at the largest [194]. This difference may create a bias during interpretation, with longer molecular weight stutters being more likely to exceed thresholds and to be incorrectly designated as real. Alternatively, a peak at a stutter location of a small allele could potentially be perceived as a stutter when actually it represents a true allele from another source. Further efforts toward more precisely defining stutter peak expectations based on the laboratory specific methodologies in use, DNA template amount and allele height should assist profile interpretation.

The ISFG recommendations on mixture interpretation [189] advocate an LR approach for low template level mixtures and the incorporation of an assessment of the probability of allele drop-in, and drop-out, when considering a mixture. In contrast, Budowle et al. [183] prefer the PE calculation (equivalent to 1-RMNE), over what they view as the complicated nature of the LR approach and the difficulty of conveying the information to the court. However, any perceived difficulty should not automatically exclude the use of the LR approach, particularly when the PE method can introduce a substantial bias under certain conditions [186-188]. It is clear that more empirical, quantitative data on the effect of low template amounts within mixtures should be generated. To this end, Bright et al. [197] described the use of the heterozygote balance and average peak heights at each locus to calculate the mixture ratio and distinguish among the contributors' genotypes. Their work has shown that the peak height at any one locus (for the Identifiler kit) is consistent with the average mixture ratio expected, and that observed across the whole profile, to within a factor of 2 provided that the average peak height is above 267 RFU [197]. Below this height, the stochastic nature of the low template amplification renders any peak height threshold inaccurate. Therefore, caution has been urged for mixture interpretation when only trace amounts DNA of one or more of the contributors is present. Expert software systems such as TrueAllele are now using quantitative probability modelling, based on peak heights and likelihood functions, to estimate the probability of different contributor's genotypes within complex mixtures, with considerable success [198-200].

The increased discussion on the appropriate interpretation for low level DNA profiles has helped to move the field forward towards a more rigorous strategy for interpreting the evidence and presenting appropriate statistical measures to the courts. While this is undoubtedly a step in the right direction, there remains much work to be done. The incorporation into the LR framework of more criminalistic aspects of trace DNA, such as the possibility of transfer, background contamination and deposition rates, will produce more conservative estimates and help to eliminate some of the critics' concerns over the validity of trace DNA as a prosecutorial tool.

Contamination issues

Contamination is a crucial issue in the analysis and interpretation of trace DNA. Contaminant DNA may appear as either the major or minor sample within a mixture or, alternatively, may overwhelm the target DNA completely. From a theoretical perspective, any DNA deposit that is not immediately relevant to the crime being investigated can be viewed as contamination. In this light, gross or sporadic contamination may appear at any point: (1) before the crime has been committed; (2) in the interval between the crime and securing the crime scene; (3) during the investigation of the scene; and/or (4) within the laboratory.

The first point can be viewed as the level of background DNA present under normal circumstances [88,201,202]. The second may occur as a result of innocent interactions by unrelated individuals. Although these two contamination points, termed adventitious transfer, cannot be strictly controlled, there are methods to account for and to minimize the impact of such contamination. These approaches/methods include:

1. perform more studies similar to those of Raymond et al. [67], Cook and Dixon [202], Dowlman et al. [203] and Toothman et al. [201] in order to learn more about the occurrence and persistence of DNA on particular surfaces in different environmental conditions

2. improve sample collection targeting (see above)

3. develop sample collection methodologies and strategies to decrease unwanted underlying DNA

4. apply cell separation techniques to mixed samples prior to DNA extraction (see above)

5. where possible obtain a reference sample for DNA profiling from the normal user(s) of an exhibit of interest and/or the person(s) who may have come into contact with it after the offence to assist profile interpretation

6. where possible obtain a profile of the background DNA from an area immediately adjacent to the target area to assist profile interpretation.

The third point of possible contamination at the crime scene can be controlled by the implementation of operating procedures designed to minimize the potential for contamination. Substantial amounts of contamination may occur from investigators moving, talking or coughing over exhibits, with the degree of contamination proportional to the distance from the exhibit [204]. At a minimum, standard operating procedures to limit contamination at a scene should include:

1. restricting access to a potential crime related exhibit or scene

2. the use of gloves and mouth masks by all those needing to touch and/or closely look at the possible crime related exhibit

3. regular changing of gloves by those touching exhibits

4. avoiding, as much as possible, touching areas on an exhibit that may be sampled for DNA

5. the availability of DNA profiles of all those individuals knowingly being in contact with an exhibit to check for potential contamination. Such data would assist in the interpretation of profiles.

An additional point to be aware of is the use of collection/detection devices on multiple exhibits and at multiple scenes. Fingerprint brushes are able to transfer amounts of DNA between exhibits that could generate profiles and may retain biological evidence for a considerable period of time [205,206]. Any device, therefore, which is in physical contact with a biological stain should be thoroughly decontaminated between use on exhibits or, preferably, DNA-free disposable equipment should be applied.

The fourth point, within laboratory contamination, may occur from individuals within the laboratory, inter-exhibit transfer or manufacturer-based consumable contamination. Although these events are generally the most strictly controlled for, high profile instances of gross contamination have been reported [207-209] and research has shown that, despite strict operating and cleaning procedures being in place, DNA may be transferred between exhibits and equipment [210]. Methods to minimize the possibility of contamination in the laboratory may include the:

1. use of DNA-free plasticware and consumables. The recent 'phantom of Heilbronn' incident in Germany and Austria, in which 'sterile' swab contamination during its manufacture caused police to link 40 crime scenes incorrectly [208]. To prevent this occurring, SWGDAM (Scientific Working Group on DNA Analysis Methods), ENFSI (European Network of Forensic Science Institutes) and BSAG (Biology Specialist Advisory Group) have now issued a position statement with specific recommendations for manufacturers and laboratories [211], to ensure that all materials used are DNA-free, rather than simply 'sterile'.

2. frequent and thorough cleaning of work areas within laboratories

3. periodic assessment of the level and location of DNA within the work place and on relevant tools to be performed and results considered from a risk management perspective. Where possible, recommendations derived from results relating to opportunities for improvement should be implemented [210]

4. separation of the work areas for item examination, DNA extraction and DNA amplification and typing

5. different exhibits being examined at different locations and/or times and the recording of where, when and by whom an exhibit was examined. This can assist in investigations of unexpected contamination events that may be detected at a later stage in analysis. The analysis of reference samples after the conclusion of crime scene samples can also aid in minimizing both inter-case contamination and the possibility of biased interpretation of the crime scene samples

6. negative controls being used at every stage of the analysis, including item examination and sampling.

Every trace DNA profile should be interpreted in the context of possible contamination. A mixed sample may contain background DNA, crime-related DNA and post-crime contamination, and it may be difficult to identify the relevant profile. In particular, the recent increase in cold-case investigations using DNA profiling increases the risk of detecting such samples, which may not have been collected, stored or examined with trace DNA detection sensitivities in mind. Thus, continued research, monitoring and a reduction of the incidence of all types of contamination is important for the further development of trace DNA analysis.

Transfer issues

Throughout the years of trace DNA use, the major focus has been on improving techniques in order to obtain highly discriminating genetic profiles from minute amounts to help identify the person from whom the DNA at a crime scene is derived. However, much less effort has been expended on understanding the activities that explain how the DNA got there.

Although the first report on trace DNA identified the occurrence of secondary transfer [51], debate regarding the existence of secondary transfer followed for several years [212]. However, empirical research has since demonstrated substantial levels of transfer under a variety of situations, confirming that secondary, and possibly further transfer, may well be occurring in a number of casework situations [210,213-215].

Greater effort needs to be made by police/crime investigators to investigate how a DNA sample arrived at the location where it was found, as well as by scientists to better understand the impact of activities on the relative amounts of DNA from particular sources at a crime scene. In some instances, it is possible to derive the chain of events that led to a trace DNA sample being present at a crime scene - for example, prior visits to the scene or the known use of an item. Awareness of these variables, and their impact on transfer events, will assist in weighting the likelihood of proposed alternative scenarios. Some preliminary contributions to our knowledge of transfer in relation to residential burglary and street robbery have recently been made [67]. Others have also started collecting this type of data with preliminary investigations focusing on the type of biological material being deposited, the condition of the biological material, the type of substrate on which the biological material is present and with which it comes into contact and the manner of contact [216-218]. It is clear that more data on these and other variables are necessary to improve the accuracy of the likelihood assessment of alternative scenarios.

Concluding remarks

Surveys of forensic practitioners regarding aspects of training, proficiency testing, procedures, methods, policies, contamination prevention, data collection and communication relating to forensic trace DNA have highlighted the need for improvements in these areas [135,136]. A number of recent reports have recommended the need for substantially greater investment into forensic services related research and development [82,219]. This review identifies how far we have come in the use of trace DNA in order to assist forensic investigations in recent years, but it also identifies several opportunities for improvement in most facets of trace DNA work. A deeper consideration of workflow processes and priorities may yield alternative protocols that allow the use of a greater portion of the available DNA, with greater sensitivity, thus increasing the chance of generating fuller and easier to interpret profiles. Further research will improve the utilisation and benefits of collecting and typing trace DNA in forensic investigations.

Abbreviations

BSA: bovine serum albumin; LCN: low copy number; LR: likelihood ratio; LT DNA: low template DNA; PCR: polymerase chain reaction; PE: probability of exclusion; RMNE: random man not excluded; SNP: single nucleotide polymorphism; STR: short tandem repeats; WGA: whole genome amplification.

Competing interests

The authors declare that they have no competing interests.

Authors' contributions

RAHvO and KNB contributed equally to this work. All the authors wrote and approved the final manuscript.

Acknowledgements

We would like to acknowledge all collaborators on our various studies regarding trace DNA.

References

  1. Kasai K, Nakamura Y, White R: Amplification of a variable number of tandem repeats (VNTR) locus (pMCT118) by the polymerase chain reaction (PCR) and its application to forensic science.

    J Forensic Sci 1990, 35:1196-1200. PubMed Abstract OpenURL

  2. Budowle B, Chakraborty R, Giusti AM, Eisenberg AJ, Allen RC: Analysis of the VNTR locus D1S80 by the PCR followed by high-resolution PAGE.

    Am J Hum Genet 1991, 48:137-144. PubMed Abstract | PubMed Central Full Text OpenURL

  3. Sajantila A, Budowle B, Ström M, Johnsson V, Lukka M, Peltonen L, Ehnholm C: PCR amplification of alleles at the D1S80 locus: comparison of a Finnish and a North American Caucasian population sample, and forensic casework evaluation.

    Am J Hum Genet 1992, 50:816-825. PubMed Abstract | PubMed Central Full Text OpenURL

  4. Kloosterman AD, Budowle B, Daselaar P: PCR-amplification and detection of the human D1S80 VNTR locus.

    Int J Leg Med 1993, 105:257-264. Publisher Full Text OpenURL

  5. Edwards A, Civitello A, Hammond HA, Caskey CT: DNA-typing and genetic mapping with trimeric and tetrameric tandem repeats.

    Am J Hum Genet 1991, 49:746-756. PubMed Abstract | PubMed Central Full Text OpenURL

  6. Edwards A, Hammond HA, Jin L, Caskey CT, Chakraborty R: Genetic variation at five trimeric and tetrameric trandem repeat loci in four human population groups.

    Genomics 1992, 12:241-253. PubMed Abstract | Publisher Full Text OpenURL

  7. Kimpton CP, Gill P, Walton A, Urquhart A, Millican ES, Adams M: Automated DNA profiling employing multiplex amplification of short tandem repeat loci.

    PCR Methods Appl 1993, 3:13-22. PubMed Abstract | Publisher Full Text OpenURL

  8. Kimpton C, Fisher D, Watson S, Adams M, Urquhart A, Lygo J, Gill P: Evaluation of an automated DNA profiling system employing multiplex amplification of four tetrameric STR loci.

    Int J Leg Med 1994, 106:302-311. Publisher Full Text OpenURL

  9. Frégeau CJ, Fourney RM: DNA typing with fluorescently tagged short tandem repeats: A sensitive and accurate approach to human identification.

    Biotechniques 1993, 15:100-119. PubMed Abstract OpenURL

  10. van Oorschot RAH, Gutowski SJ, Robinson SL: HUMTH01: amplification, species specificity, population genetics and forensic applications.

    Int J Leg Med 1994, 107:121-126. Publisher Full Text OpenURL

  11. Gill P, Kimpton C, D'Aloja E, Anderson J, Bar W, Brinkmann B, Holgersson S, Johnsson V, Kloosterman A, Lareu M, et al.: Report of the European DNA profiling group (EDNAP) - towards standardisation of short tandem repeat (STR) loci.

    Forensic Sci Int 1994, 65:51-59. PubMed Abstract | Publisher Full Text OpenURL

  12. Hammond HA, Jin L, Zhong Y, Caskey CT, Chakraborty R: Evaluation of 13 short tandem repeat loci for use in personal identification applications.

    Am J Hum Genet 1994, 55:175-189. PubMed Abstract | PubMed Central Full Text OpenURL

  13. Promega Corporation: GenePrint™STR Systems Technical Manual, Part #TMD004. Wisconsin: Promega; 1996. OpenURL

  14. Wallin JM, Buoncristiani MR, Lazaruk KD, Fildes N, Holt CL, Walsh PS: TWGDAM validation of the AmpFlSTR Blue PCR amplification kit for forensic casework analysis.

    J Forensic Sci 1998, 43:854-870. PubMed Abstract OpenURL

  15. Wallin JM, Holt CL, Lazaruk KD, Nguyen TH, Walsh PS: Constructing universal multiplex PCR systems for comparative genotyping.

    J Forensic Sci 2002, 47:52-65. PubMed Abstract OpenURL

  16. Cotton EA, Allsop RF, Guest JL, Frazier RRE, Koumi P, Callow IP, Seager A, Sparkes RL: Validation of the AmpFlSTR SGM plus system for use in forensic casework.

    Forensic Sci Int 2000, 112:151-161. PubMed Abstract | Publisher Full Text OpenURL

  17. Lins AM, Micka KA, Sprecher CJ, Taylor JA, Bacher JW, Rabbach DR, Bever RA, Creacy SD, Schumm JW: Development and population study of an eight-locus short tandem repeat (STR) multiplex system.

    J Forensic Sci 1998, 43:1168-1180. PubMed Abstract OpenURL

  18. Holt CL, Buoncristiani M, Wallin JM, Nguyen T, Lazaruk KD, Walsh PS: TWGDAM validation of AmpFlSTR PCR amplification kits for forensic DNA casework.

    J Forensic Sci 2002, 47:66-96. PubMed Abstract OpenURL

  19. Sprecher CJ, McLaren RS, Rabbach D, Krenke B, Ensenberger MG, Fulmer PM, Downey L, McCombs E, Storts DR: PowerPlex ESX and ESI systems: A suite of new STR systems designed to meet the changing needs of the DNA-typing community.

    Forensic Sci Int Genet Suppl Series 2009, 2:2-4. Publisher Full Text OpenURL

  20. Hill C, Duewer D, Kline M, Sprecher C, McLaren R, Rabbach D, Krenke B, Ensenberger M, Fulmer P, Storts D, Butler J: Concordance and population studies along with stutter and peak height ratio analysis for the PowerPlex® ESX 17 and ESI 17 Systems.

    Forensic Sci Int Genet, in press. OpenURL

  21. Promega Corporation [http://www.promega.com/applications/hmnid/] webcite

  22. Applied Biosystems [http:/ / marketing.appliedbiosystems.com/ images/ Product_Microsites/ NGM/ downloads/ NextGen_SS_v2.pdf] webcite

    Forensic News, NGM Kit; 2009.

  23. Gill P: Role of short tandem repeat DNA in forensic casework in the UK - past, present and future perspectives.

    Biotechniques 2002, 32:366-372. PubMed Abstract OpenURL

  24. Butler J: Genetics and genomics of core short tandem repeat loci used in human identity testing.

    J Forensic Sci 2006, 51:253-265. PubMed Abstract | Publisher Full Text OpenURL

  25. Sanchez JJ, Phillips C, Børsting C, Balogh K, Bogus M, Fondevila M, Harrison CD, Musgrave-Brown E, Salas A, Syndercombe-Court D, et al.: A multiplex assay with 52 single nucleotide polymorphisms for human identification.

    Electrophoresis 2006, 27:1713-1724. PubMed Abstract | Publisher Full Text OpenURL

  26. Phillips C, Fang R, Ballard D, Fondevila M, Harrison C, Hyland F, Musgrave-Brown E, Proff C, Ramos-Luis E, Sobrino B, SNPforID Consortium, et al.: Evaluation of the Genplex SNP typing system and a 49plex forensic marker panel.

    Forensic Sci Int Genet 2007, 1:180-185. PubMed Abstract | Publisher Full Text OpenURL

  27. Wiegand P, Kleiber M: Less is more - length reduction of STR amplicons using redesigned primers.

    Int J Leg Med 2001, 114:285-287. Publisher Full Text OpenURL

  28. Butler JM, Shen Y, McCord BR: The development of reduced size STR amplicons as tools for analysis of degraded DNA.

    J Forensic Sci 2003, 48:1054-1064. PubMed Abstract OpenURL

  29. Schumm JW, Wingrove RS, Douglas EK: Robust STR multiplexes for challenging casework samples.

    Int Congr Ser 2004, 1261:547-549. Publisher Full Text OpenURL

  30. Coble M, Butler J: Characterization of new miniSTR loci to aid analysis of degraded DNA.

    J Forensic Sci 2005, 50:43-53. PubMed Abstract | Publisher Full Text OpenURL

  31. Grubwieser P, Mühlmann R, Berger B, Niederstätter H, Pavlic M, Parson W: A new 'miniSTR-multiplex' displaying reduced amplicon lengths for the analysis of degraded DNA.

    Int J Leg Med 2006, 120:115-120. Publisher Full Text OpenURL

  32. Wiegand P, Klein R, Braunschweiger G, Hohoff C, Brinkmann B: Short amplicon STR multiplex for stain typing.

    Int J Leg Med 2006, 120:160-164. Publisher Full Text OpenURL

  33. Dixon LA, Dobbins AE, Pulker HK, Butler JM, Vallone PM, Coble MD, Parson W, Berger B, Grubwieser P, Mogensen HS, et al.: Analysis of artificially degraded DNA using STRs and SNPs-results of a collaborative European (EDNAP) exercise.

    Forensic Sci Int 2006, 164:33-44. PubMed Abstract | Publisher Full Text OpenURL

  34. Parsons TJ, Huel R, Davoren J, Katzmarzyk C, Milos A, Selmanović A, Smajlović L, Coble MD, Rizvić A: Application of novel 'mini-amplicon' STR multiplexes to high volume casework on degraded skeletal remains.

    Forensic Sci Int Genet 2007, 1:175-179. PubMed Abstract | Publisher Full Text OpenURL

  35. Mulero JJ, Chang CW, Lagacé RE, Wang DY, Bas JL, McMahon TP, Hennessy LK: Development and validation of the AmpFlSTR MiniFiler PCR amplification kit: a miniSTR multiplex for the analysis of degraded and/or PCR inhibited DNA.

    J Forensic Sci 2008, 53:838-852. PubMed Abstract | Publisher Full Text OpenURL

  36. Welch L, Gill P, Tucker VC, Schneider PM, Parson W, Mogensen HS, Morling N: A comparison of mini-STRs versus standard STRs - Results of a collaborative European (EDNAP) exercise.

    Forensic Sci Int Genet 2010, in press. OpenURL

  37. Hellman A, Rohleder U, Schmitter H, Wittig M: STR typing of human telogen hairs - a new approach.

    Int J Legal Med 2001, 114:269-273. PubMed Abstract | Publisher Full Text OpenURL

  38. Hochmeister MN, Budowle B, Jung J, Borer UV, Comey CT, Dirnhofer R: PCR-based typing of DNA extracted from cigarette butts.

    Int J Leg Med 1991, 104:229-233. Publisher Full Text OpenURL

  39. Higuchi R, von Beroldingen CH, Sensabaugh GF, Erlich HA: DNA typing from single hairs.

    Nature 1988, 332:543-546. PubMed Abstract | Publisher Full Text OpenURL

  40. Brinkmann B, Rand S, Bajanowski T: Forensic identification of urine samples.

    Int J Leg Med 1992, 105:59-61. Publisher Full Text OpenURL

  41. Wiegand P, Bajanowski T, Brinkmann B: DNA typing of debris from fingernails.

    Int J Leg Med 1993, 106:81-83. Publisher Full Text OpenURL

  42. Sweet D, Lorente JA, Valenzuela A, Lorente M, Villaneuva E: PCR-based DNA typing of saliva stains recovered from human skin.

    J Forensic Sci 1997, 42:447-451. PubMed Abstract OpenURL

  43. Clayton TM, Whitaker JP, Maguire CN: Identification of bodies from the scene of a mass disaster using DNA amplification of short tandem repeat (STR loci).

    Forensic Sci Int 1995, 76:7-15. PubMed Abstract | Publisher Full Text OpenURL

  44. Whitaker JP, Clayton TM, Urquhart AJ, Millican ES, Downes TJ, Kimpton CP, Gill P: Short tandem repeat typing of bodies from a mass disaster: high success rate and characteristic amplification patterns in highly degraded samples.

    Biotechniques 1995, 18:670-677. PubMed Abstract OpenURL

  45. Primorac D, Andelinovic S, Definis-Gojanovic M, Drmic I, Rezic B, Baden MM, Kennedy MA, Schanfield MS, Skakel SB, Lee HC: Identification of war victims from mass graves in Croatia, Bosnia and Herzegovina by the use of standard forensic methods and DNA testing.

    J Forensic Sci 1996, 41:891-894. PubMed Abstract OpenURL

  46. Olaisen B, Stenersen M, Mevåg B: Identification by DNA analysis of the victims of the August 1996 Spitsbergen aircraft disaster.

    Nat Genet 1997, 15:402-405. PubMed Abstract | Publisher Full Text OpenURL

  47. Holland MM, Cave CA, Holland CA, Bille TW: Development of a quality, high throughput DNA analysis procedure for skeletal samples to assist with the identification of victims from the World Trade Center attacks.

    Croat Med J 2003, 44:264-272. PubMed Abstract | Publisher Full Text OpenURL

  48. Irwin JA, Edson SM, Loreille O, Just RS, Barritt SM, Lee DA, Holland TD, Parsons TJ, Leney MD: DNA identification of 'Earthquake McGoon' 50 years post-mortem.

    J Forensic Sci 2007, 52:1115-1118. PubMed Abstract | Publisher Full Text OpenURL

  49. Sudoyo H, Widodo PT, Suryadi H, Lie YS, Safari D, Widjajanto A, Kadarmo DA, Hidayat S, Marzuki S: DNA analysis in perpetrator identification of terrorism-related disaster: suicide bombing of the Australian Embassy in Jakarta 2004.

    Forensic Sci Int Genet 2008, 2:231-237. PubMed Abstract | Publisher Full Text OpenURL

  50. Piccinini A, Coco S, Parson W, Cattaneo C, Gaudio D, Barbazza R, Galassi A: World War One Italian and Austrian soldier identification project: DNA results of the first case.

    Forensic Sci Int Genet 2010, 4:329-333. PubMed Abstract | Publisher Full Text OpenURL

  51. van Oorschot RAH, Jones MK: DNA fingerprints from fingerprints.

    Nature 1997, 387:767. Publisher Full Text OpenURL

  52. van Hoofstat DE, Deforce DL, Hubert De Pauw IP, Van den Eeckhout EG: DNA typing of fingerprints using capillary electrophoresis: effect of dactyloscopic powders.

    Electrophoresis 1999, 20:2870-2876. PubMed Abstract | Publisher Full Text OpenURL

  53. Herber B, Herold K: DNA typing of human dandruff.

    J Forensic Sci 1998, 43:648-656. PubMed Abstract OpenURL

  54. van Renterghem P, Leonard D, de Greef C: Use of latent fingerprints as a source of DNA for genetic identification.

    Prog Forensic Genet 2000, 8:501-503. OpenURL

  55. Oz C, Levi J, Novoselski Y, Volkov N, Motro U: Forensic identification of a rapist using unusual evidence.

    J Forensic Sci 1999, 44:860-862. PubMed Abstract OpenURL

  56. Webb LG, Egan SE, Turbett GR: Recovery of DNA for forensic analysis from lip cosmetics.

    J Forensic Sci 2001, 46:1474-1479. PubMed Abstract OpenURL

  57. Wickenheiser RA: Trace DNA: a review, discussion of theory, and application of the transfer of trace quantities of DNA through skin contact.

    J Forensic Sci 2002, 47:442-450. PubMed Abstract OpenURL

  58. Rutty GN: An investigation into the transference and survivability of human DNA following simulated manual strangulation with consideration of the problem of third party contamination.

    Int J Leg Med 2002, 116:170-173. Publisher Full Text OpenURL

  59. Pizzamiglio M, Mameli A, My D, Garofano L: Forensic identification of a murderer by LCN DNA collected from the inside of the victim's car.

    Int Congress Ser 2004, 1261:437-439. Publisher Full Text OpenURL

  60. Bright JA, Petricevic SF: Recovery of trace DNA and its application to DNA profiling of shoe insoles.

    Forensic Sci Int 2004, 145:7-12. PubMed Abstract | Publisher Full Text OpenURL

  61. Hillier EP, Dixon P, Stewart P, Yamashita B, Lama D: Recovery of DNA from shoes.

    J Canadian Soc Forensic Sci 2005, 38:143-150. OpenURL

  62. Polley D, Mickiewicz P, Vaughn M, Miller T, Warburton R, Komonski D, Kantautas C, Reid B, Frappier R, Newman J: Investigation of DNA recovery from firearms and cartridge cases.

    J Canadian Soc Forensic Sci 2006, 39:217-228. OpenURL

  63. Petricevic SF, Bright JA, Cockerton SL: DNA profiling of trace DNA recovered from bedding.

    Forensic Sci Int 2006, 159:21-26. PubMed Abstract | Publisher Full Text OpenURL

  64. Hellerud B, Johannessen H, Haltbakk H, Hoff-Olsen P: Zip lock poly bags in drug cases - a valuable source for obtaining identifiable DNA results?

    Forensic Sci Int Genet Suppl Ser 2008, 1:433-434. Publisher Full Text OpenURL

  65. Castella V, Mangin P: DNA profiling success and relevance of 1739 contact stains from casework.

    Forensic Sci Int Genet Suppl Ser 2008, 1:405-407. Publisher Full Text OpenURL

  66. Sewell J, Quinones I, Ames C, Multaney B, Curtis S, Seeboruth H, Moore S, Daniel B: Recovery of DNA and fingerprints from touched documents.

    Forensic Sci Int Genet 2008, 2:281-285. PubMed Abstract | Publisher Full Text OpenURL

  67. Raymond JJ, Walsh SJ, van Oorschot RAH, Gunn PR, Evans L, Roux C: Assessing trace DNA evidence from a residential burglary: abundance, transfer and persistence.

    Forensic Sci Int Genet Suppl Ser 2008, 1:442-443. Publisher Full Text OpenURL

  68. Horsman-Hall KM, Orihuela Y, Karczynski SL, Davis AL, Ban JD, Greenspoon SA: Development of STR profiles from firearms and fired cartridge cases.

    Forensic Sci Int Genet 2009, 3:242-250. PubMed Abstract | Publisher Full Text OpenURL

  69. Balogh MK, Burger J, Bender K, Schneider PM, Alt KW: STR genotyping and mtDNA sequencing of latent fingerprint on paper.

    Forensic Sci Int 2003, 137:188-195. PubMed Abstract | Publisher Full Text OpenURL

  70. Harbison SA, Hamilton JF, Walsh SJ: The New Zealand DNA databank: its development and significance as a crime solving tool.

    Sci Justice 2001, 41:33-37. PubMed Abstract | Publisher Full Text OpenURL

  71. Gunn B: An intelligence-led approach to policing in England and Wales and the impact of developments in forensic science.

    Australian J Forensic Sci 2003, 35:149-160. Publisher Full Text OpenURL

  72. Forensic Science Service [UK]: [http:/ / www.forensic.gov.uk/ pdf/ company/ publications/ annual-reports/ annual-report-NDNAD.pdf] webcite

    National DNA Database Annual Report 2003-2004. OpenURL

  73. Walsh SJ, Buckleton J: DNA Intelligence databases. In Forensic DNA Evidence Interpretation. Edited by Buckleton J, Triggs CM, Walsh SJ. Florida: CRC Press; 2005:439-469. OpenURL

  74. Voegeli P, Haas C, Kratzer A, Bär W: Evaluation of the 4-year test period of the Swiss DNA database.

    Int Congr Ser 2006, 1288:731-733. Publisher Full Text OpenURL

  75. Walsh SJ, Buckleton JS, Ribauz O, Roux C, Raymond T: Comparing the growth and effectiveness of forensic DNA databases.

    Forensic Sci Int Genet Suppl Ser 2008, 1:667-668. Publisher Full Text OpenURL

  76. National Police Improvement Agency [UK]: [http://www.npia.police.uk/en/14395.htm] webcite

    National DNA Database Annual Report 2007-2009. OpenURL

  77. Gill P, Whitaker J, Flaxman C, Brown N, Buckleton J: An investigation of the rigor of interpretation rules for STRs derived from less than 100 pg of DNA.

    Forensic Sci Int 2000, 112:17-40. PubMed Abstract | Publisher Full Text OpenURL

  78. Whitaker JP, Cotton EA, Gill P: A comparison of the characteristics of profiles produced with the AmpFlSTR SGM Plus multiplex system for both standard and low copy number (LCN) STR DNA analysis.

    Forensic Sci Int 2001, 123:215-223. PubMed Abstract | Publisher Full Text OpenURL

  79. Forster L, Thomson J, Kutranov S: Direct comparison of post-28-cycle PCR purification and modified capillary electrophoresis methods with the 34-cycle 'low-copy-number' (LCN) method for analysis of trace forensic DNA samples.

    Forensic Sci Int Genet 2008, 2:318-328. PubMed Abstract | Publisher Full Text OpenURL

  80. Petricevic S, Whitaker J, Buckleton J, Vintiner S, Patel J, Simon P, Ferraby H, Hermiz W, Russell A: Validation and development of interpretation guidelines for low copy number (LCN) DNA profiling in New Zealand using the AmpFlSTR SGM Plus multiplex.

    Forensic Sci Int Genet 2010, 4:305-310. PubMed Abstract | Publisher Full Text OpenURL

  81. Roeder AD, Elsmore P, McDonald A: Maximising DNA profiling success form sub-optimal quantities of DNA: A staged approach.

    Forensic Sci Int Genet 2009, 3:128-137. PubMed Abstract | Publisher Full Text OpenURL

  82. Caddy B, Taylor GR, Linacre AMT: A review of the science of low template DNA analysis. [http:/ / www.homeoffice.gov.uk/ publications/ police/ 790604/ Review_of_Low_Template_DNA_1.pdf] webcite

    2008.

  83. Budowle B, Eisenberg AJ, van Daal A: Concerns about low copy number typing.

    Forensic Sci Int Genet, in press. OpenURL

  84. McCartney C: LCN DNA: proof beyond reasonable doubt?

    Nat Rev Genet 2009, 9:325. Publisher Full Text OpenURL

  85. Budowle B, Eisenberg AJ, van Daal A: Low copy number has yet to achieve general acceptance.

    Forensic Sci Int Genet Suppl Ser 2009, 2:551-552. Publisher Full Text OpenURL

  86. Buckleton J, Gill P: Further comment "Low copy number has yet to achieve 'general acceptance'" by Budowle B., et al, 2009. FSI Genetics supplementary series 2, 551-552.

    Forensic Science Int Genet, in press. OpenURL

  87. Rennison A: Making the case for low-template DNA analysis.

    Nature 2010, 465:157. PubMed Abstract | Publisher Full Text OpenURL

  88. Gill P: Application of low copy number DNA profiling.

    Croat Med J 2001, 42:229-232. PubMed Abstract | Publisher Full Text OpenURL

  89. Balding DJ, Buckleton J: Interpreting low template DNA profiles.

    Forensic Sci Int Genet 2009, 4:1-10. PubMed Abstract | Publisher Full Text OpenURL

  90. Budowle B, Eisenberg AJ, van Daal A: Validity of low copy number typing and applications to forensic science.

    Croat Med J 2009, 50:207-217. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  91. Gill P, Buckleton J: A universal strategy to interpret DNA profiles that does not require a definition of low-copy-number.

    Forensic Sci Int Genet 2010, 4:221-227. PubMed Abstract | Publisher Full Text OpenURL

  92. Stoilovic M: Detection of semen and blood stains using Polilight as a light source.

    Forensic Sci Int 1991, 51:289-296. PubMed Abstract | Publisher Full Text OpenURL

  93. Springer E, Almog J, Frank A, Ziv Z, Bergman P, Qiang WG: Detection of dry body fluids by inherent short wavelength UV luminescence: preliminary results.

    Forensic Sci Int 1994, 66:89-94. PubMed Abstract | Publisher Full Text OpenURL

  94. Ben Yosef N, Almog J, Frank A, Springer E, Cantu AA: Short UV luminescence for forensic applications: Design of a real-time observation system for detection of latent fingerprints and body fluids.

    J Forensic Sci 1998, 43:299-304. PubMed Abstract OpenURL

  95. Kobus H, Silenieks E, Scharnberg J: Improving the effectiveness of fluorescence for the detection of seminal stains on fabrics.

    J Forensic Sci 2002, 47:819-823. PubMed Abstract OpenURL

  96. Lennard C, Stoilovic M: Application of forensic light sources at the crime scene. In The Practice of Crime Scene Investigation. Edited by Horswell J. Florida: CRC Press LLC; 2004:97-124. OpenURL

  97. Vandenberg N, van Oorschot RAH: The use of Polilight in the detection of seminal fluid, saliva and bloodstains and comparison with conventional chemical-based screening tests.

    J Forensic Sci 2006, 51:361-370. PubMed Abstract | Publisher Full Text OpenURL

  98. Stein C, Kyeck SH, Henssge C: DNA typing of fingerprint treated biological stains.

    J Forensic Sci 1996, 41:1012-1017. PubMed Abstract OpenURL

  99. Anderson J, Bramble S: The effects of fingermark enhancement light sources on subsequent PCR-STR DNA analysis of fresh bloodstains.

    J Forensic Sci 1997, 42:303-306. PubMed Abstract OpenURL

  100. Roux C, Gill K, Sutton J, Lennar C: A further study to investigate the effect of fingerprint enhancement techniques on the DNA analysis of bloodstains.

    J Forensic Ident 1999, 49:357-376. OpenURL

  101. Frégeau C, Germain O, Fourney R: Fingerprint enhancement revisited and the effects of blood enhancement chemicals on subsequent profiler plus fluorescent short tandem repeat DNA analysis of fresh and aged bloody fingerprints.

    J Forensic Sci 2000, 45:354-380. PubMed Abstract OpenURL

  102. Zamir A, Springer E, Glattstein B: Fingerprints and DNA: STR typing of DNA extracted from adhesive tape processing for fingerprints.

    J Forensic Sci 2000, 45:687-688. PubMed Abstract OpenURL

  103. Zamir A, Oz C, Geller B: Threat mail and forensic science: DNA profiling from items of evidence after treatment with DFO.

    J Forensic Sci 2000, 45:445-446. PubMed Abstract OpenURL

  104. Raymond J, Roux C, Du Pasquier E, Sutton J, Lennard C: The effect of common fingerprint detection techniques on the DNA typing of fingerprints deposited on different surfaces.

    J Forensic Ident 2004, 54:22-44. OpenURL

  105. van Oorschot RAH, Phelan DG, Furlong S, Scarfo GM, Holding NL, Cummins MJ: Are you collecting all the available DNA from touched objects?

    Int Congress Ser 2003, 1239:803-807. Publisher Full Text OpenURL

  106. van Oorschot RAH, Weston R, Jones MK: Retrieval of DNA from touched objects.

    Proceedings of the 14th International Symposium on the Forensic Sciences of Australian and New Zealand Forensic Science Society, Oct 12-16, 1998, Adelaide: ANZFSS OpenURL

  107. van Oorschot RA, Szepietowska I, Scott DL, Weston RK, Jones MK: Retrieval of genetic profiles from touched objects.

    Proceedings of the First International Conference in Forensic Human Identification, 1999, London OpenURL

  108. Sweet D, Lorente M, Lorente JA, Valenzuela A, Villaneuva E: An improved method to recover saliva from human skin: the double swab technique.

    J Forensic Sci 1997, 42:320-322. PubMed Abstract OpenURL

  109. Pang BCM, Cheung BKK: Double swab technique for collecting touched evidence.

    Legal Med 2007, 9:181-184. PubMed Abstract | Publisher Full Text OpenURL

  110. Prinz M, Schiffner L, Sebestyen JA, Bajda E, Tamariz J, Shaler RC, Baum H, Caragine T: Maximization of STR DNA typing success for touched objects.

    Int Congress Ser 2006, 1288:651-653. Publisher Full Text OpenURL

  111. Collopy C: Mini-Popule developed to maximize DNA recovery for robotic forensic analysis. [http:/ / www.forensicmag.com/ article/ mini-popule-developed-maximize-dna- recovery-robotic-forensic-analysis] webcite

    Forensic Magazine 2008. OpenURL

  112. Hansson O, Finnebraaten M, Knutsen Heitmann I, Ramse M, Bouzga M: Trace DNA collection - performance of minitape and three different swabs.

    Forensic Sci Int Genet Suppl Ser 2009, 2:189-190. Publisher Full Text OpenURL

  113. van Oorschot RAH, Schulz RA, Holding NL, Cummins M, Phelan D, Mitchell RJ: Improving collection methods can improve the ability to obtain typings from trace amounts of DNA from touched objects.

    The XIX International Congress of Genetics, Melbourne, Proceedings 2003 OpenURL

  114. Hall D, Fairly M: A single approach to the recovery of DNA and firearm discharge residue evidence.

    Sci Justice 2004, 44:15-19. PubMed Abstract | Publisher Full Text OpenURL

  115. Franco M, Goetz R: A new method to recover trace DNA.

    Proceedings of on Human Identification, Oct 10-12 2006, Nashville, USA OpenURL

  116. Barash M, Reshef A, Brauner P: The use of adhesive tape for recovery of DNA from crime scene items.

    J Forensic Sci 2010, 55:1058-1064. PubMed Abstract | Publisher Full Text OpenURL

  117. Jiang X: One method of collecting fallen off epithelial cell.

    Forensic Sci Int Genet Suppl Ser 2009, 2:193. Publisher Full Text OpenURL

  118. Berschick P: Collecting cell material for DNA-typing from clothing using filtertips and vacuum.

    23rd World Congress International Society for Forensic Genetics, 2009, Buenos Aires, Argentina OpenURL

  119. Elliott K, Hill DS, Lambert C, Burroughes TR, Gill P: Use of laser microdissection greatly improves the recovery of DNA from sperm on microscope slides.

    Forensic Sci Int 2003, 137:28-36. PubMed Abstract | Publisher Full Text OpenURL

  120. Di Martino D, Giuffrè G, Staiti N, Simone A, Todaro P, Saravo L: Laser microdissection and DNA typing of cells from single hair follicles.

    Forensic Sci Int 2004, 146(Suppl):S155-157. PubMed Abstract | Publisher Full Text OpenURL

  121. Anslinger K, Mack B, Bayer B, Rolf B, Eisenmenger W: Digoxigenin labelling and laser capture microdissection of male cells.

    Int J Legal Med 2005, 119:374-377. PubMed Abstract | Publisher Full Text OpenURL

  122. Budimlija ZM, Lechpammer M, Popiolek D, Fogt F, Prinz M, Bieber FR: Forensic applications of laser capture microdissection: use in DNA-based parentage testing and platform validation.

    Croat Med J 2005, 46:549-555. PubMed Abstract | Publisher Full Text OpenURL

  123. Sanders CT, Sanchez N, Ballantyne J, Peterson DA: Laser microdissection separation of pure spermatozoa from epithelial cells for short tandem repeat analysis.

    J Forensic Sci 2006, 51:748-757. PubMed Abstract | Publisher Full Text OpenURL

  124. Anoruo B, van Oorschot R, Mitchell J, Howells D: Isolating cells from non-sperm cellular mictures using the PALM microlaser micro dissection system.

    Forensic Sci Int 2007, 173:93-96. PubMed Abstract | Publisher Full Text OpenURL

  125. Anslinger K, Bayer B, Mack B, Eisenmenger W: Sex-specific fluorescent labelling of cells for laser microdissection and DNA profiling.

    Int J Legal Med 2007, 121:54-56. PubMed Abstract | Publisher Full Text OpenURL

  126. Murray C, McAlister C, Elliott K: Identification and isolation of male cells using fluorescence in situ hybridisation and laser microdissection, for use in the investigation of sexual assault.

    Forensic Sci Int Genet 2007, 1:247-252. PubMed Abstract | Publisher Full Text OpenURL

  127. Vandewoestyne M, van Hoofstat D, van Nieuwerburgh F, Deforce D: Automatic detection of spermatozoa for laser capture microdissection.

    Int J Legal Med 2009, 123:169-175. PubMed Abstract | Publisher Full Text OpenURL

  128. Vandewoestyne M, van Hoofstat D, van Nieuwerburgh F, Deforce D: Suspension fluorescence in situ hybridization (S-FISH) combined with automatic detection and laser microdissection for STR profiling of male cells in male/female mixtures.

    Int J Legal Med 2009, 123:441-447. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  129. Rieseberg M, Kasper C, Readon KF, Scheper T: Flow cytometry in biotechnology.

    Appl. Microbiol Biotechnol 2001, 56:350-360. PubMed Abstract | Publisher Full Text OpenURL

  130. Brown M, Wittwer C: Flow Cytometry: Principles and clinical applications in hematology.

    Clin Chem 2000, 46:1221-1229. PubMed Abstract | Publisher Full Text OpenURL

  131. Ibrahim SF, van den Engh G: High-speed cell sorting: fundamentals and recent advances.

    Curr Opin Biotechnol 2003, 14:5-12. PubMed Abstract | Publisher Full Text OpenURL

  132. Horsman KM, Bienvenue JM, Blasier KR, Landers JP: Forensic DNA analysis on microfluidic devices: a review.

    J Forensic Sci 2007, 52:784-799. PubMed Abstract | Publisher Full Text OpenURL

  133. Schoell WMJ, Klintschar M, Mirhashemi R, Pertl B: Separation of sperm and vaginal cells with flow cytometry for DNA typing after sexual assault.

    Obstet Gynecol 1999, 94:623-627. PubMed Abstract | Publisher Full Text OpenURL

  134. Di Nunno N, Melato M, Vimercati A, Di Nunno C, Costantinides F, Vecchiotti C, Frezzini C, Cina S, Vimercati F: DNA identification of sperm cells collected and sorted by flow cytometry.

    Am J Forensic Med Pathol 2003, 24:254-270. PubMed Abstract | Publisher Full Text OpenURL

  135. Raymond JJ, van Oorschot RA, Walsh SJ, Roux C: Trace DNA analysis: do you know what your neighbour is doing? A multi-jurisdictional survey.

    Forensic Sci Int Genet 2008, 2:19-28. PubMed Abstract | Publisher Full Text OpenURL

  136. Raymond JJ, van Oorschot RAH, Walsh SJ, Gunn PR, Roux C: How far have we come with trace DNA since 2004? The Australian and New Zealand experience.

    Australian J Forensic Sci, in press. OpenURL

  137. Walsh PS, Metzger DA, Higuchi R: Chelex 100 as a medium for simple extraction of DNA for PCR-based typing from forensic material.

    Biotechniques 1991, 10:506-513. PubMed Abstract OpenURL

  138. Sambrook J, Fritsch EF, Maniatis T: Molecular cloning: a laboratory manual. New York: CSHL Press; 1989. OpenURL

  139. Vandenberg N, van Oorschot RAH, Mitchell RJ: An evaluation of selected DNA extraction strategies for short tandem repeat typing.

    Electrophoresis 1997, 18:1624-1626. PubMed Abstract | Publisher Full Text OpenURL

  140. Greenspoon SA, Scarpetta MA, Drayton ML, Turek SA: QIAamp Spin columns as a method of DNA isolation for forensic casework.

    J Forensic Sci 1998, 43:1024-1030. PubMed Abstract OpenURL

  141. Greenspoon SA, Ban JD, Sykes K, Ballard EJ, Edler SS, Baisden M, Covington BL: Application of the BioMek 2000 Laboratory Automation Workstation and the DNA IQ System to the extraction of forensic casework samples.

    J Forensic Sci 2004, 49:29-39. PubMed Abstract OpenURL

  142. Frégeau CJ, Lett CM, Fourney RM: Validation of a DNA IQ™-based extraction method for TECAN robotic liquid handling workstations for processing casework.

    Forensic Sci Int Genet 2010, 4:292-304. PubMed Abstract | Publisher Full Text OpenURL

  143. Côté A, Landry M, Rochette S, Gibson K, Lapointe M, Sarafian V: Automated DNA extraction from large volumes.

    Forensic Sci Int Genet Suppl Ser 2008, 1:22-23. Publisher Full Text OpenURL

  144. Schiffner L, Bajda E, Prinz M, Sebestyen J, Shaler R, Caragine T: Optimization of a simple, automatable extraction method to recover sufficient DNA from low copy number DNA samples for generation of short tandem repeat profiles.

    Croat Med J 2005, 46:578-586. PubMed Abstract | Publisher Full Text OpenURL

  145. Hudlow WR, Krieger R, Meusel M, Sehhat JC, Timken MD, Buocristiani MR: The NucleoSpin DNA Clean-up XS kit for the concentration and purification of genomic DNA extracts: an alternative to microdialysis filtration.

    Forensic Sci Int Genet, in press. OpenURL

  146. Park SJ, Kim JY, Yang YG, Lee SH: Direct STR amplification from whole blood and blood- or saliva-spotted FTA without DNA purification.

    J Forensic Sci 2008, 53:335-341. PubMed Abstract | Publisher Full Text OpenURL

  147. Barbaro A, Cormaci P, Teatino A, Barbaro A: Use of 'AnyDirect PCR buffer' for PCR amplification of washed bloodstains: a case report.

    Forensic Sci Int Genet Suppl Ser 2008, 1:11-12. Publisher Full Text OpenURL

  148. Raymond JJ, van Oorschot RAH, Walsh SJ, Roux C, Gunn PR: Trace DNA and street robbery: a criminalistic approach to DNA evidence.

    Forensic Sci Int Genet Suppl Ser 2009, 2:544-546. Publisher Full Text OpenURL

  149. Cupples CM, Champagne JR, Lewis KE, Cruz TD: STR profiles from DNA samples with 'undetected' or low Quantifiler results.

    J Forensic Sci 2009, 54:103-107. PubMed Abstract | Publisher Full Text OpenURL

  150. Gilbert N: Science in court: DNA's identity crisis.

    Nature 2010, 464:347-348. PubMed Abstract | Publisher Full Text OpenURL

  151. Rameckers J, Hummel S, Herrmann B: How many cycles does a PCR need? Determinations of cycle numbers depending on the number of targets and the reaction efficiency factor.

    Naturwissenschaften 1997, 84:259-262. PubMed Abstract | Publisher Full Text OpenURL

  152. Kloosterman AD, Kersbergen P: Efficacy and limits of genotyping low copy number (LCN) DNA samples by multiplex PCR of STR loci.

    J Soc Biol 2003, 197:351-359. PubMed Abstract OpenURL

  153. Jensen GA, Singh SK, Kumar R, Wengel J, Jacobsen JP: A comparison of the solution structures of an LNA:DNA duplex and the unmodified DNA:DNA duplex.

    J Chem Soc Perkin Trans 2001, 2:1224-1232. OpenURL

  154. Braasch DA, Corey DR: Locked nucleic acid (LNA): fine-tuning the recognition of DNA and RNA.

    Chem Biol 2001, 8:1-7. PubMed Abstract | Publisher Full Text OpenURL

  155. Ballantyne KN, van Oorschot RA, Mitchell RJ: Locked nucleic acids in PCR increase sensitivity and performance.

    Genomics 2008, 91:301-305. PubMed Abstract | Publisher Full Text OpenURL

  156. Ballantyne KN, van Oorschot RA, Mitchell RJ: Increased amplification success from forensic samples with locked nucleic acids.

    Forensic Sci Int Genet, in press. OpenURL

  157. Gaines ML, Wojtkiewicz PW, Valentine JA, Brown CL: Reduced volume PCR amplification reactions using the AmpFlSTR Profiler Plus kit.

    J Forensic Sci 2002, 47:1224-1237. PubMed Abstract OpenURL

  158. Schmidt U, Lutz-Bonengel S, Weisser H, Sänger T, Pollak S, Schön U, Zacher T, Mann W: Low-volume amplification on chemically structured ships using the PowerPlex16 DNA amplification kit.

    Int J Legal Med 2006, 120:42-48. PubMed Abstract | Publisher Full Text OpenURL

  159. Hedman J, Nordgaard A, Rasmusson B, Ansell R, Rådström P: Improved forensic DNA analysis through the use of alternative DNA polymerases and statistical modelling of DNA profiling.

    Biotechniques 2009, 47:951-958. PubMed Abstract | Publisher Full Text OpenURL

  160. Kreader CA: Relief of amplification inhibition in PCR with bovine serum albumin or T4 gene 32 protein.

    Appl Environ Microbiol 1996, 62:1102-1106. PubMed Abstract | PubMed Central Full Text OpenURL

  161. Jiang Z, Zhang X, Deka R, Jin L: Genome amplification of single sperm using multiple displacement amplification.

    Nucleic Acids Res 2005, 33:e91. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  162. Hellani A, Coskun S, Benkhalifa M, Tbakhi A, Sakati N, Al-Odaib A, Ozand P: Multiple displacement amplification on single cell and possible PGD applications.

    Mol Hum Reprod 2004, 10:847-852. PubMed Abstract | Publisher Full Text OpenURL

  163. Raghunathan A, Ferguson HR, Bornarth CJ, Song W, Driscoll M, Lasken RS: Genomic DNA amplification from a single bacterium.

    Appl Environ Microbiol 2005, 71:3342-3347. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  164. Ballantyne KN, van Oorschot RAH, Mitchell RJ: Comparison of two whole genome amplification methods for STR genotyping of LCN and degraded DNA samples.

    Forensic Sci Int 2007, 166:35-41. PubMed Abstract | Publisher Full Text OpenURL

  165. Balogh MK, Børsting C, Sánchez DP, Thacker C, Syndercombe-Court D, Carracedo A, Morling N, Schneider PM: Application of whole genome amplification for forensic analysis.

    Int Congr Ser 2006, 1288:725-727. Publisher Full Text OpenURL

  166. Thacker CR, Balogh MK, Børsting C, Ramos E, Sánchez DP, Carracedo A, Morling N, Schneider P, Syndercombe-Court D, SNPforID Consortium: The effect of whole genome amplification on samples originating from more than one donor.

    Int Congr Ser 2006, 1288:722-724. Publisher Full Text OpenURL

  167. Ballantyne KN, van Oorschot RAH, Mitchell RJ, Koukoulas I: Molecular crowding increases the amplification success of multiple displacement amplification and short tandem repeat genotyping.

    Anal Biochem 2008, 355:298-303. Publisher Full Text OpenURL

  168. Ballantyne KN, van Oorschot RAH, Muharam I, van Daal A, Mitchell RJ: Decreasing amplification bias associated with multiple displacement amplification and short tandem repeat genotyping.

    Anal Biochem 2008, 368:222-229. Publisher Full Text OpenURL

  169. Pan X, Urban AE, Palejev D, Schulz D, Grubert F, Hu Y, Snyder M, Weissman SM: A procedure for highly specific, sensitive, and unbiased whole-genome amplification.

    Proc Natl Acad Sci 2008, 105:15499-15504. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  170. Smith PJ, Ballantyne J: Simplified low-copy-number DNA analysis by post-PCR purification.

    J Forensic Sci 2007, 52:820-829. PubMed Abstract | Publisher Full Text OpenURL

  171. Butler JM, Buel E, Crivellente F, McCord BR: Forensic DNA typing by capillary electrophoresis using the ABI Prism 310 and 3100 genetic analysers for STR analysis.

    Electrophoresis 2004, 25:1397-1412. PubMed Abstract | Publisher Full Text OpenURL

  172. Weston AA, Nagel JHA, Benschop CCG, Weiler NEC, de Jong BJ, Sijen T: Higher capillary electrophoresis injection settings as an efficient approach to increase the sensitivity of STR typing.

    J Forensic Sci 2009, 54:591-598. PubMed Abstract | Publisher Full Text OpenURL

  173. Caragine T, Mikulasovich R, Tamariz J, Bajda E, Sebestyen J, Baum H, Prinz M: Validation of testing and interpretation protocols for low template DNA samples using AmpFlSTR Identifiler.

    Croat Med J 2009, 50:250-267. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  174. Invitrogen Life Science: Fluorophores and their amine-reactive dervatives. [http:/ / www.invitrogen.com/ site/ us/ en/ home/ References/ Molecular-Probes-The-Handbook.html] webcite

    Molecular Probes: The Handbook Chapter 1 OpenURL

  175. Berti L, Zie J, Medintz IL, Glazer AN, Mathies RA: Energy transfer cassettes for facile labeling of sequencing and PCR primers.

    Anal Biochem 2001, 292:188-197. PubMed Abstract | Publisher Full Text OpenURL

  176. Yeung SH, Seo TS, Crouse CA, Greenspoon SA, Chiesl TN, Ban JD, Mathies RA: Fluorescence energy transfer-labeled primers for high-performance forensic DNA profiling.

    Electrophoresis 2008, 29:2251-2259. PubMed Abstract | Publisher Full Text OpenURL

  177. Gill P, Curran J, Elliot K: A graphical simulation model of the entire DNA process associated with the analysis of short tandem repeat loci.

    Nucl Acid Res 2005, 33:632-643. Publisher Full Text OpenURL

  178. Lucy D, Curran JM, Pirie AA, Gill P: The probability of achieving full allelic representation for LCN-STR profiling of haploid cells.

    Sci Justice 2007, 47:168-171. PubMed Abstract | Publisher Full Text OpenURL

  179. Benschop CCG, van der Beek CP, Meiland HC, van Gorp AGM, Westen AA, Sijen T: Low template STR typing: Effect of replication number and consensus method on genotyping reliability and DNA database search results.

    Forensic Sci Int Genet, in press. OpenURL

  180. R v Sean Hoey:

    Crown Court of Northern Ireland. 2007.

    341/05

    OpenURL

  181. Rennison A: The forensic science regulator: response to Professor Brian Caddy's review of the science of low template DNA analysis. [http:/ / www.homeoffice.gov.uk/ publications/ police/ operational-policing/ response-caddy-dna-review?view=Bina ry] webcite

  182. Gill P, Puch-Solis R, Curran J: The low-template-DNA (stochastic) threshold - its determination relative to risk analysis for national DNA databases.

    Forensic Sci Int Genet 2009, 3:104-111. PubMed Abstract | Publisher Full Text OpenURL

  183. Budowle B, Onorato AJ, Callaghan TF, Della Manna A, Gross AM, Guerrieri RA, Luttman JC, McClure DL: Mixture interpretation: defining the relevant features for guidelines for the assessment of mixed DNA profiles in forensic casework.

    J Forensic Sci 2009, 54:810-821. PubMed Abstract | Publisher Full Text OpenURL

  184. Gilder JR, Doom TE, Inman K, Krane DE: Run-specific limits of detection and quantitation for STR-based DNA testing.

    J Forensic Sci 2007, 52:97-101. PubMed Abstract | Publisher Full Text OpenURL

  185. Taberlet P, Griffin S, Goossens B, Questiau S, Manceau V, Escaravage N, Waits LP, Bouvet J: Reliable genotyping of samples with very low DNA quantities using PCR.

    Nucl Acids Res 1996, 24:3189-3194. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  186. Buckleton J, Triggs C: Is the 2p rule always conservative?

    Forensic Sci Int 2006, 159:206-209. PubMed Abstract | Publisher Full Text OpenURL

  187. Buckleton J, Curran J: A discussion of the merits of random man not excluded and likelihood ratios.

    Forensic Sci Int Genet 2008, 2:343-348. PubMed Abstract | Publisher Full Text OpenURL

  188. Curran JM, Buckleton J: Inclusion probabilities and dropout.

    J Forensic Sci 2010, 55:1171-1173. PubMed Abstract | Publisher Full Text OpenURL

  189. Gill P, Brenner CH, Buckleton JS, Carracedo A, Krawczak M, Mayr WR, Morling N, Prinz M, Schneider PM, Weir BS, DNA commission of the International Society of Forensic Genetics: DNA commission of the International Society of Forensic Genetics: Recommendations on the interpretations of mixtures.

    Forensic Sci Int 2006, 160:90-101. PubMed Abstract | Publisher Full Text OpenURL

  190. Cowell RG, Lauritzen SL, Mortera J: Probabilistic expert systems for handling artifacts in complex DNA mixtures.

    Forensic Sci Int Genet, in press. OpenURL

  191. Curran JM, Gill P, Bill MR: Interpretation of repeat measurement DNA evidence allowing for multiple contributors and population substructure.

    Forensic Sci Int 2005, 148:47-55. PubMed Abstract | Publisher Full Text OpenURL

  192. Gill P, Kirkham A, Curran J: LoComatioN: a software tool for the analysis of low copy number DNA profiles.

    Forensic Sci Int 2007, 166:128-138. PubMed Abstract | Publisher Full Text OpenURL

  193. Tvedebrink T, Eriksen PS, Mogensen HS, Morling N: Estimating the probability of allelic drop-out of STR alleles in forensic genetics.

    Forensic Sci Int Genet 2009, 3:222-226. PubMed Abstract | Publisher Full Text OpenURL

  194. Walsh PS, Fildes NJ, Reynolds R: Sequence analysis and characterisation of stutter products at the tetranucleotide repeat locus vWA.

    Nucl Acids Res 1996, 24:2807-2812. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  195. LeClair B, Frégeau CJ, Bowen KL, Fourney RM: Systematic analysis of stutter percentages and allele peak height and peak area ratios at heterozygous STR loci for forensic casework and database samples.

    J Forensic Sci 2004, 49:968-80. PubMed Abstract OpenURL

  196. Gibb AJ, Huell A, Simmons MC, Brown RM: Characterisation of forward stutter in the AmpFlSTR SGM Plus PCR.

    Sci Justice 2009, 49:24-31. PubMed Abstract | Publisher Full Text OpenURL

  197. Bright JA, Turkington J, Buckleton J: Examination of the variability in mixed DNA profile parameters for the Identifiler multiplex.

    Forensic Sci Int Genet 2010, 4:111-114. PubMed Abstract | Publisher Full Text OpenURL

  198. Perlin MW: Scientific validation of mixture interpretation methods. [http:/ / www.promega.com/ geneticidproc/ ussymp17proc/ oralpresentations/ Perlin.pdf] webcite

    Proceedings of Promega's 17th International Symposium on Human Identification OpenURL

  199. Perlin MW, Sinelnikov A: An information gap in DNA evidence interpretation.

    PLoS One 2009, 4:e8327. PubMed Abstract | Publisher Full Text | PubMed Central Full Text OpenURL

  200. Perlin MW, Kadane JB, Cotton RW: Match Likelihood Ratio for Uncertain Genotypes.

    Law, Probability and Risk 2009, 8:289-302. Publisher Full Text OpenURL

  201. Toothman MH, Kester KM, Champagne J, Cruz TD, Street WS, Brown BL: Characterisation of human DNA in environmental samples.

    Forensic Sci Int 2008, 178:7-15. PubMed Abstract | Publisher Full Text OpenURL

  202. Cook O, Dixon L: The prevalence of mixed DNA profiles in fingernail samples taken from individuals in the general population.

    Forensic Sci Int Genet 2007, 1:62-68. PubMed Abstract | Publisher Full Text OpenURL

  203. Dowlman EA, Martin NC, Foy MJ, Lochner T, Neocleous T: The prevalence of mixed DNA profiles on fingernail swabs.

    Sci Justice 2010, 50:64-71. PubMed Abstract | Publisher Full Text OpenURL

  204. Rutty GN, Hopwood A, Tucker V: The effectiveness of protective clothing in the reduction of potential DNA contamination of the scene crime.

    Int J Leg Med 2003, 117:170-174. OpenURL

  205. van Oorschot RAH, Treadwell S, Beaurepaire J, Holding NL, Mitchell RJ: Beware of the possibility of fingerprinting techniques transferring DNA.

    J Forensic Sci 2005, 50:1417-1422. PubMed Abstract | Publisher Full Text OpenURL

  206. Proff C, Schmitt C, Schneider PM, Foerster G, Rothschild MA: Experiments on the DNA contamination risk via latent fingerprint brushes.

    Int Congr Ser 2006, 1288:601-603. Publisher Full Text OpenURL

  207. Hunter P: Anything you touch may be used against you.

    Embo Rep 2010, 11:424-427. PubMed Abstract | Publisher Full Text OpenURL

  208. Time Magazine Online. Germany's Phantom Serial Killer: A DNA Blunder [http://www.time.com/time/world/article/0,8599,1888126,00.html] webcite

    2009.

  209. Sullivan K, Johnson P, Rowlands D, Allen H: New developments and challenges in the use of the UK DNA database: addressing the issue of contaminated consumables.

    Forensic Sci Int 2004, 146(Suppl):S175-S176. PubMed Abstract OpenURL

  210. Poy AL, van Oorschot RAH: Trace DNA presence, origin and transfer within a forensic biology laboratory and its potential effect on casework.

    J Forensic Ident 2006, 56:558-576. OpenURL

  211. Gill P, Rowlands D, Tully GG, Bastisch I, Staples T, Scott P: Manufacturer contamination of disposable plastic-ware and other reagents - an agreed position statement by ENFSI, SWGDAM and BSAG.

    Forensic Sci Int Genet 2010, 4:269-270. PubMed Abstract | Publisher Full Text OpenURL

  212. Ladd C, Adamowicz MS, Bourke MT, Scherczinger CA, Lee HC: A systematic analysis of secondary DNA transfer.

    J Forensic Sci 1999, 44:1270-1272. PubMed Abstract OpenURL

  213. Lowe A, Murray C, Whitaker J, Tully G, Gill P: The propensity of individuals to deposit DNA and secondary transfer of low level DNA from individuals to inert surfaces.

    Forensic Sci Int 2002, 129:25-34. PubMed Abstract | Publisher Full Text OpenURL

  214. Farmen RK, Jaghø R, Cortez P, Frøyland ES: Assessment of individual shedder status and implication for secondary DNA transfer.

    Forensic Sci Int Genet Suppl Ser 2008, 1:415-417. Publisher Full Text OpenURL

  215. Wiegand P, Heimbold C, Klein R, Immel U, Stiller D, Klintschar M: Transfer of biological stains from different surfaces.

    Int J Legal Med, in press. OpenURL

  216. van Oorschot RAH, Goray M, Eken E, Mitchell RJ: Impact of relevant variables on the transfer of biological substances.

    Forensic Sci Int Genet Suppl Ser 2009, 2:547-548. Publisher Full Text OpenURL

  217. Goray M, Mitchell RJ, van Oorschot RAH: Investigation of secondary DNA transfer of skin cells under controlled test conditions.

    Legal Med 2010, 12:117-120. PubMed Abstract | Publisher Full Text OpenURL

  218. Goray M, Eken E, Mitchell RJ, van Oorschot RA: Secondary DNA transfer of biological substances under varying test conditions.

    Forensic Sci Int Genet 2010, 4:62-67. PubMed Abstract | Publisher Full Text OpenURL

  219. National Research Council of the National Academies: Strengthening forensic science in the United States: a path forward. Washington DC: The National Academies Press; 2009.